Microchip Technology
Das Bild kann eine Darstellung sein.
Siehe Spezifikationen für Produktdetails.
MIC2551AYTS-TR
Im Detail sehen Datenblätter

MIC2551AYTS-TR

Product Overview

Category

The MIC2551AYTS-TR belongs to the category of integrated circuits (ICs) and specifically falls under the family of bus transceivers.

Use

This product is commonly used for bidirectional communication between different voltage buses, making it suitable for applications in various electronic devices and systems.

Characteristics

  • Voltage Level Translation: The MIC2551AYTS-TR is designed to translate logic levels between different voltage domains.
  • High-Speed Communication: It supports high-speed data transmission, making it suitable for applications requiring rapid data exchange.
  • Low Power Consumption: The device is designed to operate with low power consumption, enhancing its suitability for battery-powered applications.

Package

The MIC2551AYTS-TR is available in a small outline package (SOP) format, which provides ease of integration into circuit designs.

Essence

The essence of this product lies in its ability to facilitate seamless communication between components operating at different voltage levels within electronic systems.

Packaging/Quantity

The MIC2551AYTS-TR is typically supplied in tape and reel packaging, with a standard quantity per reel.

Specifications

  • Operating Voltage Range: 1.65V to 5.5V
  • Data Rate: Up to 20 Mbps
  • Operating Temperature Range: -40°C to 125°C
  • Package Type: Small Outline Package (SOP)

Detailed Pin Configuration

The MIC2551AYTS-TR features a total of 8 pins, including VCC, GND, A, B, Y, and control pins for enabling and disabling the device.

Functional Features

  • Bidirectional Communication: The device enables bidirectional data transfer between two voltage domains.
  • Automatic Direction Control: It incorporates automatic direction control, simplifying the interface design.
  • Built-in ESD Protection: The IC includes built-in electrostatic discharge (ESD) protection, enhancing robustness in real-world applications.

Advantages and Disadvantages

Advantages

  • Seamless voltage level translation
  • High-speed data transmission capability
  • Low power consumption
  • Built-in ESD protection

Disadvantages

  • Limited to specific voltage ranges
  • May require additional components for certain applications

Working Principles

The MIC2551AYTS-TR operates by monitoring the direction of data flow and translating logic levels between the A and B ports based on the control input.

Detailed Application Field Plans

Industrial Automation

In industrial automation systems, the MIC2551AYTS-TR can be used to facilitate communication between sensors, actuators, and control units operating at different voltage levels.

Consumer Electronics

Within consumer electronics, this IC can enable seamless data exchange between components such as microcontrollers, display modules, and peripheral devices.

Automotive Electronics

In automotive applications, the MIC2551AYTS-TR can support communication between various onboard systems, contributing to enhanced functionality and reliability.

Detailed and Complete Alternative Models

  • SN74LVC1T45DBVR
  • PCA9306DCUR
  • TXB0104PWR

In conclusion, the MIC2551AYTS-TR serves as a versatile solution for voltage level translation and bidirectional communication in diverse electronic applications, offering high-speed data transmission and low power consumption. While it has specific limitations, its functional features and application versatility make it a valuable component in modern electronic designs.

Word Count: 515

Listen Sie 10 häufige Fragen und Antworten im Zusammenhang mit der Anwendung von MIC2551AYTS-TR in technischen Lösungen auf

  1. What is the MIC2551AYTS-TR?

    • The MIC2551AYTS-TR is a high-speed CAN transceiver with integrated protection features, commonly used in automotive and industrial applications.

  2. What is the operating voltage range of MIC2551AYTS-TR?

    • The operating voltage range of MIC2551AYTS-TR is typically 4.5V to 5.5V.

  3. What are the key features of MIC2551AYTS-TR?

    • The key features include high-speed data rates, integrated ESD protection, low standby current, and compatibility with ISO11898-2 and ISO11898-5 standards.

  4. What are the typical applications for MIC2551AYTS-TR?

    • Typical applications include CAN bus systems in automotive electronics, industrial automation, and other embedded control systems.

  5. What is the maximum data rate supported by MIC2551AYTS-TR?

    • The maximum data rate supported by MIC2551AYTS-TR is typically 1Mbps.

  6. Does MIC2551AYTS-TR have built-in thermal shutdown protection?

    • Yes, MIC2551AYTS-TR includes built-in thermal shutdown protection to prevent damage from excessive heat.

  7. Is MIC2551AYTS-TR compatible with extended temperature ranges?

    • Yes, MIC2551AYTS-TR is designed to operate within extended temperature ranges, making it suitable for harsh environments.

  8. What is the pinout configuration of MIC2551AYTS-TR?

    • The pinout configuration typically includes pins for CANH, CANL, VCC, GND, and other control and protection features.

  9. Can MIC2551AYTS-TR be used in fault-tolerant CAN networks?

    • Yes, MIC2551AYTS-TR supports fault-tolerant CAN networks and can help ensure reliable communication in such systems.

  10. Are there any application notes or reference designs available for using MIC2551AYTS-TR?

    • Yes, the manufacturer provides application notes and reference designs to assist engineers in implementing MIC2551AYTS-TR in technical solutions.