Das Bild kann eine Darstellung sein.
Siehe Spezifikationen für Produktdetails.
MIC25400YML-TR

MIC25400YML-TR

Product Overview

Category

MIC25400YML-TR belongs to the category of integrated circuits (ICs).

Use

This product is commonly used in electronic devices for power management applications.

Characteristics

  • Integrated circuit
  • Power management functionality
  • Small form factor
  • High efficiency
  • Low power consumption

Package

MIC25400YML-TR is available in a compact surface mount package.

Essence

The essence of this product lies in its ability to efficiently manage power in electronic devices, ensuring optimal performance and energy conservation.

Packaging/Quantity

MIC25400YML-TR is typically packaged in reels or tubes, with a quantity of 2500 units per reel/tube.

Specifications

  • Input Voltage Range: 2.7V to 5.5V
  • Output Voltage Range: 0.8V to 3.6V
  • Maximum Output Current: 4A
  • Efficiency: Up to 95%
  • Operating Temperature Range: -40°C to +85°C

Detailed Pin Configuration

MIC25400YML-TR features the following pin configuration:

  1. VIN: Input voltage pin
  2. GND: Ground pin
  3. EN: Enable pin
  4. FB: Feedback pin
  5. VOUT: Output voltage pin

Functional Features

  • Wide input voltage range allows compatibility with various power sources.
  • High output current capability enables powering of demanding loads.
  • Excellent efficiency ensures minimal power loss during operation.
  • Enable pin provides control over the device's power state.
  • Feedback pin allows for voltage regulation and stability.

Advantages and Disadvantages

Advantages

  • Compact size facilitates integration into space-constrained designs.
  • High efficiency results in reduced power consumption and heat generation.
  • Wide input voltage range enhances versatility and compatibility.
  • Excellent output current capability enables driving of power-hungry components.

Disadvantages

  • Limited output voltage range may not be suitable for certain applications requiring higher voltages.
  • Temperature limitations restrict usage in extreme environments.

Working Principles

MIC25400YML-TR operates based on a switching regulator topology. It utilizes high-frequency switching to efficiently convert the input voltage to the desired output voltage, while minimizing power loss and heat dissipation.

Detailed Application Field Plans

MIC25400YML-TR finds application in various electronic devices, including but not limited to: - Mobile phones - Tablets - Portable media players - Wearable devices - IoT devices

In these applications, it serves as a vital component for managing power supply, ensuring stable and efficient operation.

Detailed and Complete Alternative Models

  1. MIC25401YML-TR: Similar to MIC25400YML-TR with additional features for enhanced power management capabilities.
  2. MIC25402YML-TR: Higher output current variant of MIC25400YML-TR, suitable for more demanding applications.
  3. MIC25403YML-TR: Lower output current variant of MIC25400YML-TR, ideal for low-power devices.

These alternative models offer similar functionality and compatibility, providing flexibility in choosing the most suitable option for specific design requirements.

Word count: 440 words

Listen Sie 10 häufige Fragen und Antworten im Zusammenhang mit der Anwendung von MIC25400YML-TR in technischen Lösungen auf

Sure! Here are 10 common questions and answers related to the application of MIC25400YML-TR in technical solutions:

  1. Q: What is the MIC25400YML-TR? A: The MIC25400YML-TR is a power distribution switch with integrated overcurrent protection, designed for use in various technical solutions.

  2. Q: What is the input voltage range of the MIC25400YML-TR? A: The MIC25400YML-TR has an input voltage range of 2.7V to 5.5V.

  3. Q: What is the maximum output current of the MIC25400YML-TR? A: The MIC25400YML-TR can provide a maximum output current of 4A.

  4. Q: Can the MIC25400YML-TR be used in battery-powered applications? A: Yes, the MIC25400YML-TR is suitable for battery-powered applications due to its low quiescent current and wide input voltage range.

  5. Q: Does the MIC25400YML-TR have built-in overcurrent protection? A: Yes, the MIC25400YML-TR features integrated overcurrent protection, which helps protect the system from excessive current draw.

  6. Q: Can the MIC25400YML-TR be used in automotive applications? A: Yes, the MIC25400YML-TR is automotive-grade and can be used in automotive applications that require reliable power distribution.

  7. Q: What is the thermal shutdown feature of the MIC25400YML-TR? A: The MIC25400YML-TR has a thermal shutdown feature that protects the device from overheating by shutting down when the temperature exceeds a certain threshold.

  8. Q: Can the MIC25400YML-TR be used in industrial control systems? A: Yes, the MIC25400YML-TR is suitable for use in industrial control systems due to its robust design and wide operating temperature range.

  9. Q: Does the MIC25400YML-TR have reverse polarity protection? A: No, the MIC25400YML-TR does not have built-in reverse polarity protection. External measures should be taken to prevent reverse polarity connection.

  10. Q: What package does the MIC25400YML-TR come in? A: The MIC25400YML-TR is available in a compact 10-pin MLF (QFN) package, which is suitable for space-constrained applications.

Please note that these answers are general and may vary depending on the specific requirements of your technical solution. It is always recommended to refer to the datasheet and consult with the manufacturer for detailed information.