Melexis Technologies NV
Das Bild kann eine Darstellung sein.
Siehe Spezifikationen für Produktdetails.
MLX90360LDC-ACD-200-SP
Im Detail sehen Datenblätter

MLX90360LDC-ACD-200-SP

Product Overview

The MLX90360LDC-ACD-200-SP belongs to the category of magnetic position sensors. It is commonly used for measuring the angular or linear position of a magnetic field. The sensor possesses characteristics such as high accuracy, robustness, and low power consumption. It is typically packaged in a small form factor, making it suitable for various applications. The essence of the MLX90360LDC-ACD-200-SP lies in its ability to provide precise and reliable position sensing. It is usually available in packaging quantities suitable for both prototyping and production purposes.

Specifications

  • Operating Voltage: 2.2V to 5.5V
  • Output Interface: Analog/PWM
  • Measurement Range: 0° to 360°
  • Resolution: 12-bit
  • Operating Temperature: -40°C to 150°C
  • Package Type: SOIC-8

Detailed Pin Configuration

The MLX90360LDC-ACD-200-SP features a standard SOIC-8 pin configuration: 1. VDD 2. GND 3. VOUT 4. PWM/ANALOG 5. MODE 6. MISO 7. MOSI 8. SCK

Functional Features

  • High Accuracy: Provides precise position measurement.
  • Robustness: Suitable for harsh environments.
  • Low Power Consumption: Energy-efficient operation.
  • Flexible Output Interface: Supports analog and PWM output.

Advantages and Disadvantages

Advantages

  • High accuracy and resolution
  • Wide operating temperature range
  • Small form factor
  • Versatile output interface options

Disadvantages

  • Limited measurement range compared to some alternatives
  • Higher cost compared to basic magnetic sensors

Working Principles

The MLX90360LDC-ACD-200-SP operates based on the Hall effect, where the position of a magnet relative to the sensor affects the output signal. This principle enables accurate and non-contact position sensing.

Detailed Application Field Plans

The MLX90360LDC-ACD-200-SP finds extensive use in various applications, including: - Automotive: Throttle position sensing, pedal position sensing - Industrial: Motor control, robotics, linear actuator position feedback - Consumer Electronics: Joystick position sensing, gaming peripherals

Detailed and Complete Alternative Models

Some alternative models to the MLX90360LDC-ACD-200-SP include: - AS5600 from AMS - TLE5012B from Infineon - A1333 from Allegro Microsystems

In conclusion, the MLX90360LDC-ACD-200-SP offers high precision and reliability in magnetic position sensing, making it suitable for diverse applications across industries.

[Word Count: 366]

Listen Sie 10 häufige Fragen und Antworten im Zusammenhang mit der Anwendung von MLX90360LDC-ACD-200-SP in technischen Lösungen auf

  1. What is the MLX90360LDC-ACD-200-SP sensor used for?

    • The MLX90360LDC-ACD-200-SP sensor is a high-accuracy, programmable 3D Hall sensor designed for contactless rotary position sensing applications.

  2. What are the key features of the MLX90360LDC-ACD-200-SP sensor?

    • The key features include 12-bit resolution, SPI communication interface, non-contact sensing, and a wide operating temperature range.

  3. How does the MLX90360LDC-ACD-200-SP sensor work?

    • The sensor uses Hall effect technology to detect changes in magnetic fields, allowing it to accurately measure the angle of rotation without physical contact.

  4. What are some typical technical solutions that can benefit from the MLX90360LDC-ACD-200-SP sensor?

    • Technical solutions such as automotive steering angle sensing, industrial motor control, robotics, and medical devices can benefit from the precise and reliable angle measurements provided by this sensor.

  5. What is the output format of the MLX90360LDC-ACD-200-SP sensor?

    • The sensor provides digital output in the form of angle data, which can be easily interfaced with microcontrollers or other digital systems.

  6. Can the MLX90360LDC-ACD-200-SP sensor be used in harsh environments?

    • Yes, the sensor is designed to operate in harsh environments, with robust construction and a wide temperature range, making it suitable for demanding industrial and automotive applications.

  7. How is the MLX90360LDC-ACD-200-SP sensor programmed and calibrated?

    • The sensor can be programmed and calibrated using the provided software tools and programming interfaces, allowing for customization and fine-tuning to specific application requirements.

  8. What are the power supply requirements for the MLX90360LDC-ACD-200-SP sensor?

    • The sensor operates from a single power supply voltage in the range of 3.0V to 5.5V, making it compatible with a wide range of electronic systems.

  9. Is the MLX90360LDC-ACD-200-SP sensor suitable for battery-powered applications?

    • Yes, the sensor's low power consumption and wide supply voltage range make it well-suited for battery-powered applications where energy efficiency is crucial.

  10. Are there any known limitations or considerations when integrating the MLX90360LDC-ACD-200-SP sensor into a technical solution?

    • While the sensor offers high accuracy and reliability, proper shielding and isolation from external magnetic fields should be considered during integration to ensure optimal performance.