Melexis Technologies NV
Das Bild kann eine Darstellung sein.
Siehe Spezifikationen für Produktdetails.
MLX90316LDC-BCG-000-SP
Im Detail sehen Datenblätter

MLX90316LDC-BCG-000-SP

Product Overview

The MLX90316LDC-BCG-000-SP belongs to the category of magnetic position sensors. It is commonly used in automotive, industrial, and consumer applications to detect the linear or angular position of a magnetic field. The sensor possesses characteristics such as high accuracy, robustness, and low power consumption. It is typically available in a small package with essential components for easy integration into various systems. The essence of the MLX90316LDC-BCG-000-SP lies in its ability to provide precise and reliable position sensing. It is usually packaged individually and is available in different quantities based on the specific requirements of the application.

Specifications

  • Operating Voltage: 2.2V to 5.5V
  • Output Interface: Analog/PWM
  • Operating Temperature Range: -40°C to 150°C
  • Resolution: 12-bit
  • Package Type: SOIC-8

Detailed Pin Configuration

The MLX90316LDC-BCG-000-SP features an 8-pin configuration: 1. VDD 2. GND 3. VOUT 4. MODE 5. CLK 6. CS 7. NC 8. NC

Functional Features

  • High Accuracy Position Sensing
  • Robust Design for Harsh Environments
  • Low Power Consumption
  • Configurable Output Interface
  • Wide Operating Temperature Range

Advantages and Disadvantages

Advantages

  • Precise and Reliable Position Sensing
  • Suitable for Harsh Environmental Conditions
  • Flexible Output Interface Options

Disadvantages

  • Limited Operating Temperature Range
  • Higher Cost Compared to Some Alternatives

Working Principles

The MLX90316LDC-BCG-000-SP operates based on the Hall Effect, where it detects changes in the magnetic field to determine the position of a magnet. This principle allows for accurate and contactless position sensing, making it ideal for various applications.

Detailed Application Field Plans

The MLX90316LDC-BCG-000-SP finds extensive use in automotive applications for throttle position sensing, pedal position sensing, and gear shift detection. In industrial settings, it is employed for linear actuator position feedback and rotary encoder applications. Additionally, in consumer electronics, it is utilized in joystick position sensing and control knobs.

Detailed and Complete Alternative Models

Some alternative models to the MLX90316LDC-BCG-000-SP include the MLX90316KDC-BCG-000-RE, MLX90316LDC-BCG-000-TU, and MLX90316LDC-BCG-000-SS. These models offer similar functionality with variations in package type, interface options, and temperature ranges, providing flexibility for different application requirements.

In conclusion, the MLX90316LDC-BCG-000-SP is a versatile magnetic position sensor with high accuracy and robustness, suitable for a wide range of applications across different industries.

[Word Count: 398]

Listen Sie 10 häufige Fragen und Antworten im Zusammenhang mit der Anwendung von MLX90316LDC-BCG-000-SP in technischen Lösungen auf

  1. What is the MLX90316LDC-BCG-000-SP sensor used for?

    • The MLX90316LDC-BCG-000-SP sensor is a high-accuracy, programmable linear Hall sensor designed for applications such as position sensing, angular sensing, and current sensing.

  2. What is the operating voltage range of the MLX90316LDC-BCG-000-SP sensor?

    • The operating voltage range of the MLX90316LDC-BCG-000-SP sensor is typically between 2.7V and 5.5V.

  3. What is the output interface of the MLX90316LDC-BCG-000-SP sensor?

    • The MLX90316LDC-BCG-000-SP sensor features a digital PWM output interface, making it suitable for interfacing with microcontrollers and other digital systems.

  4. Can the MLX90316LDC-BCG-000-SP sensor be used for non-contact position sensing?

    • Yes, the MLX90316LDC-BCG-000-SP sensor is commonly used for non-contact position sensing due to its high accuracy and programmable features.

  5. What are the typical applications of the MLX90316LDC-BCG-000-SP sensor in automotive systems?

    • In automotive systems, the MLX90316LDC-BCG-000-SP sensor can be used for throttle position sensing, pedal position sensing, and gear shift position sensing.

  6. Is the MLX90316LDC-BCG-000-SP sensor suitable for harsh industrial environments?

    • Yes, the MLX90316LDC-BCG-000-SP sensor is designed to operate reliably in harsh industrial environments, thanks to its robust construction and high resistance to environmental stress.

  7. How does the MLX90316LDC-BCG-000-SP sensor handle temperature variations?

    • The MLX90316LDC-BCG-000-SP sensor features built-in temperature compensation, allowing it to maintain accurate performance across a wide temperature range.

  8. Can the MLX90316LDC-BCG-000-SP sensor be customized for specific application requirements?

    • Yes, the MLX90316LDC-BCG-000-SP sensor offers programmable options for sensitivity, offset, and output behavior, allowing customization to suit specific application needs.

  9. What are the key advantages of using the MLX90316LDC-BCG-000-SP sensor in technical solutions?

    • The MLX90316LDC-BCG-000-SP sensor offers high accuracy, low power consumption, and versatile programmability, making it ideal for a wide range of technical solutions.

  10. Are there any special considerations for integrating the MLX90316LDC-BCG-000-SP sensor into a design?

    • When integrating the MLX90316LDC-BCG-000-SP sensor, it's important to consider magnetic interference, proper PCB layout, and appropriate signal conditioning to ensure optimal performance.