Maxim Integrated
Das Bild kann eine Darstellung sein.
Siehe Spezifikationen für Produktdetails.
MAX963ESD-T
Im Detail sehen Datenblätter

MAX963ESD-T

Product Overview

  • Category: Integrated Circuit (IC)
  • Use: Operational Amplifier
  • Characteristics: Low Noise, High Precision, Rail-to-Rail Output
  • Package: 14-Pin Small Outline Integrated Circuit (SOIC)
  • Essence: Amplification and Signal Conditioning
  • Packaging/Quantity: Tape and Reel, 2500 units per reel

Specifications

  • Supply Voltage Range: ±2.5V to ±18V
  • Input Offset Voltage: 1.5mV (maximum)
  • Input Bias Current: 10pA (maximum)
  • Gain Bandwidth Product: 8MHz
  • Slew Rate: 4V/µs
  • Operating Temperature Range: -40°C to +85°C

Detailed Pin Configuration

  1. V+
  2. IN-
  3. IN+
  4. V-
  5. NC
  6. OUT
  7. NC
  8. NC
  9. NC
  10. NC
  11. NC
  12. NC
  13. NC
  14. GND

Functional Features

  • Low input offset voltage for accurate amplification
  • High gain bandwidth product for wide frequency response
  • Rail-to-rail output allows maximum signal swing
  • Low noise performance for precise signal conditioning
  • Wide supply voltage range enables versatile applications

Advantages and Disadvantages

Advantages

  • High precision amplification
  • Wide operating temperature range
  • Low noise performance
  • Versatile supply voltage range

Disadvantages

  • Limited pin configuration options
  • Relatively low slew rate compared to some alternatives

Working Principles

The MAX963ESD-T is an operational amplifier designed to amplify and condition electrical signals with high precision. It operates by taking the difference between the voltages at its non-inverting and inverting inputs and amplifying this difference to produce an output voltage. The rail-to-rail output allows the amplifier to provide a maximum signal swing, ensuring accurate representation of the input signal.

Detailed Application Field Plans

The MAX963ESD-T is commonly used in various applications that require precise amplification and signal conditioning. Some of its typical application fields include:

  1. Medical Devices: Used in medical instrumentation for amplifying bioelectric signals with high accuracy.
  2. Audio Systems: Employed in audio amplifiers and preamplifiers to enhance sound quality and minimize noise.
  3. Sensor Interfaces: Utilized in sensor signal conditioning circuits to amplify weak sensor outputs.
  4. Industrial Control Systems: Integrated into control systems to amplify and condition control signals for accurate processing.

Detailed and Complete Alternative Models

  1. MAX962ESA: Similar operational amplifier with lower supply voltage range (±2V to ±16V).
  2. MAX964ESA: Operational amplifier with higher slew rate (10V/µs) but slightly higher input offset voltage (2mV).
  3. MAX961ESA: Operational amplifier with lower gain bandwidth product (5MHz) but lower input bias current (5pA).

(Note: This is not an exhaustive list of alternative models. Please refer to the manufacturer's datasheets for more options.)

Word count: 383 words

Listen Sie 10 häufige Fragen und Antworten im Zusammenhang mit der Anwendung von MAX963ESD-T in technischen Lösungen auf

Sure! Here are 10 common questions and answers related to the application of MAX963ESD-T in technical solutions:

  1. Q: What is the MAX963ESD-T? A: The MAX963ESD-T is a low-power, precision operational amplifier designed for use in various applications such as sensor amplification, signal conditioning, and data acquisition.

  2. Q: What is the supply voltage range for the MAX963ESD-T? A: The supply voltage range for the MAX963ESD-T is typically between 2.7V and 5.5V.

  3. Q: What is the input offset voltage of the MAX963ESD-T? A: The input offset voltage of the MAX963ESD-T is typically around 0.5mV.

  4. Q: Can the MAX963ESD-T operate with a single power supply? A: Yes, the MAX963ESD-T can operate with a single power supply, making it suitable for battery-powered applications.

  5. Q: What is the maximum output current of the MAX963ESD-T? A: The maximum output current of the MAX963ESD-T is typically around 40mA.

  6. Q: Is the MAX963ESD-T suitable for high-frequency applications? A: Yes, the MAX963ESD-T has a unity-gain bandwidth of typically 1MHz, making it suitable for many high-frequency applications.

  7. Q: Does the MAX963ESD-T have built-in protection features? A: Yes, the MAX963ESD-T includes built-in protection against short circuits and thermal shutdown.

  8. Q: Can the MAX963ESD-T be used in temperature-sensitive applications? A: Yes, the MAX963ESD-T has a wide operating temperature range of -40°C to +125°C, making it suitable for temperature-sensitive applications.

  9. Q: What is the input bias current of the MAX963ESD-T? A: The input bias current of the MAX963ESD-T is typically around 1pA.

  10. Q: Can the MAX963ESD-T be used in low-power applications? A: Yes, the MAX963ESD-T has a low quiescent current of typically 60µA, making it suitable for low-power applications.

Please note that these answers are general and may vary depending on specific datasheet specifications and application requirements.