Meixin Integrated
Das Bild kann eine Darstellung sein.
Siehe Spezifikationen für Produktdetails.
MAX9612AUB+
Im Detail sehen Datenblätter

MAX9612AUB+ - English Editing Encyclopedia Entry

Product Overview

Category: Integrated Circuits (ICs)

Use: The MAX9612AUB+ is a high-side current-sense amplifier designed for precision current measurement in various applications. It provides accurate and reliable current sensing capabilities.

Characteristics: - High accuracy - Wide input voltage range - Low offset voltage - Low quiescent current - Fast response time

Package: The MAX9612AUB+ comes in a small 10-pin µMAX package, which allows for space-efficient integration into electronic circuits.

Essence: The MAX9612AUB+ is an essential component for precise current measurement in electronic systems, enabling efficient monitoring and control of power consumption.

Packaging/Quantity: The MAX9612AUB+ is typically available in tape and reel packaging, with a quantity of 2500 units per reel.

Specifications

  • Supply Voltage Range: 2.7V to 5.5V
  • Input Common-Mode Voltage Range: -0.1V to +60V
  • Quiescent Current: 50µA (typical)
  • Gain Error: ±0.3% (maximum)
  • Offset Voltage: ±100µV (maximum)
  • Bandwidth: 500kHz (typical)
  • Operating Temperature Range: -40°C to +125°C

Pin Configuration

The MAX9612AUB+ features the following pin configuration:

  1. IN+
  2. IN-
  3. REF
  4. GND
  5. VCC
  6. OUT
  7. SET
  8. FB
  9. NC
  10. NC

Functional Features

  • High-side current sensing
  • Precision current measurement
  • Overcurrent detection and protection
  • Adjustable gain and offset
  • Fast response time
  • Low power consumption

Advantages and Disadvantages

Advantages: - High accuracy current sensing - Wide input voltage range - Low offset voltage for precise measurements - Compact package for space-constrained applications - Flexible gain and offset adjustment

Disadvantages: - Limited maximum supply voltage range - Relatively high cost compared to some alternatives

Working Principles

The MAX9612AUB+ operates by amplifying the voltage drop across a shunt resistor placed in series with the load. This amplified voltage is then converted into a proportional current measurement. The device utilizes a precision amplifier and internal compensation circuitry to ensure accurate and reliable current sensing.

Detailed Application Field Plans

The MAX9612AUB+ finds application in various fields, including but not limited to: 1. Power management systems 2. Battery charging and monitoring 3. Motor control systems 4. Industrial automation 5. Solar energy systems 6. LED lighting control

Detailed and Complete Alternative Models

  1. INA219 - Current Shunt Monitor
  2. LTC6101 - Precision High-Side Current Sense Amplifier
  3. AD8210 - High Common-Mode Voltage Current Shunt Monitor
  4. MAX4080 - Precision High-Side Current Sense Amplifier
  5. ACS712 - Fully Integrated Hall Effect-Based Linear Current Sensor

These alternative models offer similar functionality and can be considered as substitutes for the MAX9612AUB+ depending on specific requirements and design constraints.

In conclusion, the MAX9612AUB+ is a highly accurate and versatile high-side current-sense amplifier suitable for a wide range of applications. Its compact size, low power consumption, and adjustable features make it an excellent choice for precision current measurement needs.

Listen Sie 10 häufige Fragen und Antworten im Zusammenhang mit der Anwendung von MAX9612AUB+ in technischen Lösungen auf

Sure! Here are 10 common questions and answers related to the application of MAX9612AUB+ in technical solutions:

  1. Q: What is the MAX9612AUB+? A: The MAX9612AUB+ is a high-side current-sense amplifier with an integrated comparator and reference voltage.

  2. Q: What is the purpose of the MAX9612AUB+? A: The MAX9612AUB+ is designed to accurately measure current in various applications, such as motor control, power management, and battery monitoring.

  3. Q: What is the input voltage range of the MAX9612AUB+? A: The MAX9612AUB+ can operate with input voltages ranging from 2.7V to 76V.

  4. Q: What is the maximum common-mode voltage that the MAX9612AUB+ can handle? A: The MAX9612AUB+ can handle common-mode voltages up to 76V.

  5. Q: What is the output voltage range of the MAX9612AUB+? A: The output voltage range of the MAX9612AUB+ is from 0V to VCC - 1.2V.

  6. Q: How accurate is the current measurement provided by the MAX9612AUB+? A: The MAX9612AUB+ has a typical gain error of ±0.5% and a typical offset error of ±50µV, ensuring accurate current measurements.

  7. Q: Can the MAX9612AUB+ be used in high-frequency applications? A: Yes, the MAX9612AUB+ has a bandwidth of 350kHz, making it suitable for high-frequency applications.

  8. Q: Does the MAX9612AUB+ have any built-in protection features? A: Yes, the MAX9612AUB+ includes overcurrent and undervoltage lockout (UVLO) protection to safeguard against fault conditions.

  9. Q: What is the package type of the MAX9612AUB+? A: The MAX9612AUB+ is available in a 10-pin µMAX package.

  10. Q: Are there any evaluation kits or reference designs available for the MAX9612AUB+? A: Yes, Maxim Integrated provides evaluation kits and reference designs to help users quickly prototype and implement the MAX9612AUB+ in their applications.

Please note that these answers are general and may vary depending on the specific requirements and use cases. It's always recommended to refer to the datasheet and application notes provided by the manufacturer for detailed information.