Meixin Integrated
Das Bild kann eine Darstellung sein.
Siehe Spezifikationen für Produktdetails.
MAX626CSA+T
Im Detail sehen Datenblätter

MAX626CSA+T

Product Overview

  • Category: Integrated Circuit (IC)
  • Use: Voltage Reference
  • Characteristics: Low Dropout, Precision, Low Noise
  • Package: 8-pin SOIC (Small Outline Integrated Circuit)
  • Essence: Provides a stable and accurate voltage reference for various electronic applications
  • Packaging/Quantity: Tape and Reel, 2500 units per reel

Specifications

  • Input Voltage Range: 2.7V to 11V
  • Output Voltage Range: 1.25V to 10V
  • Initial Accuracy: ±0.5%
  • Temperature Coefficient: ±50ppm/°C
  • Quiescent Current: 60µA
  • Dropout Voltage: 200mV at 100mA load current
  • Output Noise Voltage: 30µV RMS (10Hz to 100kHz)

Detailed Pin Configuration

The MAX626CSA+T features an 8-pin SOIC package with the following pin configuration:

  1. VOUT: Output Voltage
  2. GND: Ground
  3. NC: No Connection
  4. NC: No Connection
  5. IN: Input Voltage
  6. NC: No Connection
  7. NC: No Connection
  8. SHDN: Shutdown Control

Functional Features

  • Low dropout voltage ensures efficient power conversion.
  • High precision provides accurate voltage reference.
  • Low noise output minimizes interference in sensitive applications.
  • Shutdown control allows for power-saving operation.

Advantages and Disadvantages

Advantages: - Wide input voltage range enables versatile use. - Excellent initial accuracy ensures reliable performance. - Low quiescent current reduces power consumption. - Compact SOIC package facilitates easy integration.

Disadvantages: - Limited output voltage range may restrict certain applications. - Temperature coefficient could affect stability in extreme conditions.

Working Principles

The MAX626CSA+T is a voltage reference IC that generates a stable output voltage regardless of input variations. It utilizes a bandgap voltage reference circuit to achieve high precision and low noise characteristics. The internal amplifier compares the reference voltage with an external resistor divider network, providing a regulated output voltage. The shutdown control pin allows the device to enter a low-power state when not in use.

Detailed Application Field Plans

The MAX626CSA+T finds applications in various electronic systems, including but not limited to: - Power management circuits - Analog-to-digital converters (ADCs) - Digital-to-analog converters (DACs) - Voltage-controlled oscillators (VCOs) - Sensor interfaces - Battery-powered devices

Detailed and Complete Alternative Models

  1. LM4040CIM3-5.0/NOPB: 5V Precision Voltage Reference, SOT-23 package.
  2. LT1461ACS8-5#PBF: 5V Micropower Precision Voltage Reference, 8-pin SOIC package.
  3. REF5025IDGKT: 2.5V Low Dropout Voltage Reference, 8-pin VSSOP package.
  4. ADR4525BRZ: 2.5V High Precision Voltage Reference, TO-92 package.
  5. MAX6190AESA+: 4.096V Ultra-Low-Power Voltage Reference, 8-pin SOIC package.

These alternative models offer similar functionality and can be considered based on specific application requirements.

Word count: 305 words

Listen Sie 10 häufige Fragen und Antworten im Zusammenhang mit der Anwendung von MAX626CSA+T in technischen Lösungen auf

Sure! Here are 10 common questions and answers related to the application of MAX626CSA+T in technical solutions:

  1. Q: What is the MAX626CSA+T? A: The MAX626CSA+T is a precision, low-power, dual operational amplifier that can be used in various electronic applications.

  2. Q: What is the supply voltage range for MAX626CSA+T? A: The supply voltage range for MAX626CSA+T is typically between 2.7V and 12V.

  3. Q: What is the maximum output current of MAX626CSA+T? A: The maximum output current of MAX626CSA+T is typically around 20mA.

  4. Q: Can I use MAX626CSA+T in battery-powered devices? A: Yes, MAX626CSA+T is suitable for battery-powered devices due to its low-power consumption.

  5. Q: What is the input offset voltage of MAX626CSA+T? A: The input offset voltage of MAX626CSA+T is typically around 0.5mV.

  6. Q: Can I use MAX626CSA+T in audio applications? A: Yes, MAX626CSA+T can be used in audio applications such as amplifiers, filters, and equalizers.

  7. Q: Does MAX626CSA+T have built-in protection features? A: No, MAX626CSA+T does not have built-in protection features. External protection circuitry may be required.

  8. Q: What is the operating temperature range for MAX626CSA+T? A: The operating temperature range for MAX626CSA+T is typically between -40°C and +85°C.

  9. Q: Can I use MAX626CSA+T in high-frequency applications? A: Yes, MAX626CSA+T has a high unity-gain bandwidth and can be used in high-frequency applications.

  10. Q: Is MAX626CSA+T RoHS compliant? A: Yes, MAX626CSA+T is RoHS compliant, meaning it does not contain any restricted substances.

Please note that the answers provided here are general and may vary depending on specific datasheet specifications or application requirements.