Das Bild kann eine Darstellung sein.
Siehe Spezifikationen für Produktdetails.
MAX333ACUP+T

MAX333ACUP+T

Product Overview

  • Category: Integrated Circuits (ICs)
  • Use: Operational Amplifiers (Op Amps)
  • Characteristics:
    • High precision
    • Low power consumption
    • Rail-to-rail output swing
    • Wide supply voltage range
  • Package: 20-TSSOP
  • Essence: Analog Devices, Inc. operational amplifier
  • Packaging/Quantity: Tape & Reel (TR) packaging, 2500 units per reel

Specifications

  • Manufacturer: Analog Devices, Inc.
  • Series: MAX333A
  • Amplifier Type: General Purpose
  • Number of Circuits: 3
  • Slew Rate: 1 V/µs
  • Gain Bandwidth Product (GBWP): 1MHz
  • Current - Input Bias: 10nA
  • Voltage - Input Offset: 500µV
  • Voltage - Supply, Single/Dual (±): 2.7V ~ 5.5V, ±1.35V ~ 2.75V
  • Operating Temperature: -40°C ~ 85°C
  • Mounting Type: Surface Mount
  • Package / Case: 20-TSSOP (0.173", 4.40mm Width)

Pin Configuration

The MAX333ACUP+T has a 20-pin TSSOP package with the following pin configuration:

```


| | --| V- OUT1 |-- Pin 1 --| IN- OUT2 |-- Pin 2 --| IN+ OUT3 |-- Pin 3 --| V+ GND |-- Pin 4 --| V- OUT4 |-- Pin 5 --| IN- OUT5 |-- Pin 6 --| IN+ OUT6 |-- Pin 7 --| V+ GND |-- Pin 8 --| V- OUT7 |-- Pin 9 --| IN- OUT8 |-- Pin 10 --| IN+ OUT9 |-- Pin 11 --| V+ GND |-- Pin 12 --| V- OUT10 |-- Pin 13 --| IN- OUT11 |-- Pin 14 --| IN+ OUT12 |-- Pin 15 --| V+ NC |-- Pin 16 --| V- NC |-- Pin 17 --| IN- NC |-- Pin 18 --| IN+ NC |-- Pin 19 --| V+ NC |-- Pin 20 |___________| ```

Functional Features

The MAX333ACUP+T is a high-precision operational amplifier with three independent amplifiers in a single package. It offers rail-to-rail output swing, allowing the output voltage to reach close to the supply rails. The device operates over a wide supply voltage range and exhibits low power consumption.

Advantages and Disadvantages

Advantages: - High precision amplification - Low power consumption - Wide supply voltage range - Rail-to-rail output swing

Disadvantages: - Limited number of amplifiers (3 in total)

Working Principles

The MAX333ACUP+T operates based on the principles of operational amplifiers. It amplifies the difference between the input voltages and produces an output voltage that is proportional to this difference. The rail-to-rail output swing feature allows the output voltage to closely match the supply voltage levels.

Detailed Application Field Plans

The MAX333ACUP+T can be used in various applications, including but not limited to: - Sensor signal conditioning - Data acquisition systems - Portable instrumentation - Battery-powered devices - Audio amplification

Detailed and Complete Alternative Models

Some alternative models that can be considered as alternatives to the MAX333ACUP+T are: - MAX44246: Quad, Low-Power, Single-Supply, Rail-to-Rail Op Amp - MCP6004: Quad General Purpose Op Amp - LM324: Quad Operational Amplifier

These alternative models offer similar functionality and characteristics, providing options for different design requirements.

Word count: 314 words

Listen Sie 10 häufige Fragen und Antworten im Zusammenhang mit der Anwendung von MAX333ACUP+T in technischen Lösungen auf

  1. What is the maximum operating temperature of MAX333ACUP+T?
    - The maximum operating temperature of MAX333ACUP+T is 125°C.

  2. What is the typical supply current of MAX333ACUP+T?
    - The typical supply current of MAX333ACUP+T is 120µA.

  3. Can MAX333ACUP+T operate with a single power supply?
    - Yes, MAX333ACUP+T can operate with a single power supply ranging from 2.7V to 5.5V.

  4. What is the input voltage range of MAX333ACUP+T?
    - The input voltage range of MAX333ACUP+T is -0.3V to VCC + 0.3V.

  5. Does MAX333ACUP+T have built-in ESD protection?
    - Yes, MAX333ACUP+T has built-in ESD protection up to ±15kV.

  6. What is the gain bandwidth product of MAX333ACUP+T?
    - The gain bandwidth product of MAX333ACUP+T is 100kHz.

  7. Can MAX333ACUP+T be used in low-power applications?
    - Yes, MAX333ACUP+T is suitable for low-power applications due to its low supply current.

  8. What is the package type of MAX333ACUP+T?
    - MAX333ACUP+T is available in a 14-pin TSSOP package.

  9. Is MAX333ACUP+T RoHS compliant?
    - Yes, MAX333ACUP+T is RoHS compliant.

  10. What are the typical applications of MAX333ACUP+T?
    - Typical applications of MAX333ACUP+T include sensor interfaces, battery-powered systems, and portable instrumentation.