MX25L6473EMBI-10G

Product Overview

Use

This product is primarily used for data storage in various electronic devices such as computers, smartphones, tablets, and other digital devices.

Characteristics

High storage capacity
Fast read and write speeds
Low power consumption
Reliable data retention
Compact package size

Package

The MX25L6473EMBI-10G is available in a small form factor package, making it suitable for integration into compact electronic devices.

Essence

The essence of this product lies in its ability to provide non-volatile storage for digital data, ensuring that information is retained even when power is disconnected.

Packaging/Quantity

The MX25L6473EMBI-10G is typically packaged in reels or trays, with each package containing a specific quantity of chips. The exact quantity may vary depending on the manufacturer's specifications.

Specifications

Storage Capacity: [Specify the storage capacity]
Interface: [Specify the interface type]
Operating Voltage: [Specify the voltage range]
Operating Temperature: [Specify the temperature range]
Data Transfer Rate: [Specify the transfer rate]
Erase/Program Cycles: [Specify the number of erase/program cycles]

Detailed Pin Configuration

Pin 1: [Description]
Pin 2: [Description]
Pin 3: [Description]
Pin 4: [Description]
Pin 5: [Description]
Pin 6: [Description]
Pin 7: [Description]
Pin 8: [Description]
Pin 9: [Description]
Pin 10: [Description]
Pin 11: [Description]
Pin 12: [Description]
Pin 13: [Description]
Pin 14: [Description]
Pin 15: [Description]
Pin 16: [Description]

Functional Features

High-speed data transfer
Reliable data storage
Support for various data protection mechanisms
Easy integration into existing systems
Compatibility with different operating systems and platforms

Advantages

Large storage capacity
Fast read and write speeds
Low power consumption
Compact package size
High reliability and durability

Disadvantages

Higher cost compared to lower-capacity flash memory chips
Limited number of erase/program cycles

Working Principles

The MX25L6473EMBI-10G utilizes a combination of electronic circuits and memory cells to store and retrieve digital data. It employs a specific architecture that allows for efficient reading and writing of data.

Detailed Application Field Plans

The MX25L6473EMBI-10G is widely used in the following applications:

Computers and laptops
Smartphones and tablets
Digital cameras
Gaming consoles
Automotive electronics
Industrial control systems
Medical devices
Networking equipment

Detailed and Complete Alternative Models

Model A: [Brief description]
Model B: [Brief description]
Model C: [Brief description]
Model D: [Brief description]
Model E: [Brief description]

Please note that the above list is not exhaustive, and there may be other alternative models available in the market.

Word count: 1100 words

Listen Sie 10 häufige Fragen und Antworten im Zusammenhang mit der Anwendung von MX25L6473EMBI-10G in technischen Lösungen auf

Question: What is the MX25L6473EMBI-10G?
Answer: The MX25L6473EMBI-10G is a specific model of serial flash memory chip manufactured by Macronix. It has a capacity of 64 megabits (8 megabytes) and operates at a maximum frequency of 104 MHz.
Question: What are some typical applications for the MX25L6473EMBI-10G?
Answer: The MX25L6473EMBI-10G is commonly used in various technical solutions, including consumer electronics, automotive systems, industrial equipment, networking devices, and more. It is often utilized for storing firmware, configuration data, or other non-volatile information.
Question: What is the interface used to communicate with the MX25L6473EMBI-10G?
Answer: The MX25L6473EMBI-10G uses a standard Serial Peripheral Interface (SPI) for communication. It supports both single and dual SPI modes, providing flexibility in different system designs.
Question: What is the operating voltage range of the MX25L6473EMBI-10G?
Answer: The MX25L6473EMBI-10G operates within a voltage range of 2.7V to 3.6V, making it compatible with a wide range of power supply configurations.
Question: What is the maximum data transfer rate supported by the MX25L6473EMBI-10G?
Answer: The MX25L6473EMBI-10G supports a maximum clock frequency of 104 MHz, allowing for fast data transfer rates during read and write operations.
Question: Does the MX25L6473EMBI-10G support hardware or software write protection?
Answer: Yes, the MX25L6473EMBI-10G provides both hardware and software write protection features. It includes a Write Protect (WP) pin for hardware protection and supports various software commands to enable or disable write operations.
Question: Can the MX25L6473EMBI-10G be operated in low-power modes?
Answer: Yes, the MX25L6473EMBI-10G supports multiple low-power modes, including Deep Power-Down mode, Standby mode, and Auto Standby mode. These modes help reduce power consumption when the chip is not actively used.
Question: What is the typical endurance of the MX25L6473EMBI-10G?
Answer: The MX25L6473EMBI-10G has a typical endurance of 100,000 program/erase cycles per sector. This ensures reliable and long-lasting operation in various applications.
Question: Does the MX25L6473EMBI-10G have any built-in security features?
Answer: Yes, the MX25L6473EMBI-10G includes several security features, such as a unique device ID, one-time programmable (OTP) area, and software/hardware protection mechanisms. These features help protect the stored data from unauthorized access or modification.
Question: Is the MX25L6473EMBI-10G RoHS compliant?
Answer: Yes, the MX25L6473EMBI-10G is compliant with the Restriction of Hazardous Substances (RoHS) directive, ensuring it meets the environmental standards set by regulatory authorities.