Littelfuse Inc.
Das Bild kann eine Darstellung sein.
Siehe Spezifikationen für Produktdetails.
V230LS10CP
Im Detail sehen Datenblätter

V230LS10CP

Introduction

The V230LS10CP is a component belonging to the category of varistors, which are electronic devices used to protect circuits from excessive voltage. This entry provides an overview of the V230LS10CP, including its basic information, specifications, pin configuration, functional features, advantages and disadvantages, working principles, application field plans, and alternative models.

Basic Information Overview

  • Category: Varistor
  • Use: Protection against excessive voltage in electronic circuits
  • Characteristics: High energy absorption capacity, fast response time
  • Package: Radial leaded disc
  • Essence: Zinc oxide-based
  • Packaging/Quantity: Available in various packaging options, typically sold in bulk quantities

Specifications

  • Voltage Rating: 230V
  • Peak Current: 4.5kA
  • Energy Absorption: 60J
  • Operating Temperature Range: -40°C to +85°C
  • Lead Diameter: 0.8mm
  • Lead Spacing: 7.5mm

Detailed Pin Configuration

The V230LS10CP has a radial leaded disc package with two leads for connection to the circuit. The detailed pin configuration is as follows: - Pin 1: Connection point for the positive terminal - Pin 2: Connection point for the negative terminal

Functional Features

  • Voltage Clamping: Provides protection by clamping excessive voltage levels
  • Fast Response Time: Rapidly responds to voltage surges to safeguard the circuit
  • High Energy Absorption: Capable of dissipating significant amounts of energy during transient events

Advantages and Disadvantages

Advantages

  • Effective protection against voltage spikes
  • Fast response time
  • High energy absorption capacity

Disadvantages

  • Limited lifespan after multiple surge events
  • Susceptible to thermal aging over time

Working Principles

The V230LS10CP operates based on the principle of varistor action, where its resistance decreases as the voltage across it increases. When subjected to excessive voltage, the varistor conducts current to divert the energy away from the protected circuit, thereby preventing damage.

Detailed Application Field Plans

The V230LS10CP is commonly used in various electronic and electrical applications, including: - Surge protection in power supplies - Overvoltage protection in telecommunication equipment - Circuit protection in industrial control systems - Transient voltage suppression in consumer electronics

Detailed and Complete Alternative Models

Several alternative models to the V230LS10CP include: - V250LS10P - V275LS10P - V300LS10P - V320LS10P

These alternative models offer similar voltage ratings and energy absorption capabilities, providing flexibility in design and application requirements.

In conclusion, the V230LS10CP varistor is a crucial component in protecting electronic circuits from voltage transients and surges. Its high energy absorption capacity, fast response time, and effective voltage clamping make it a valuable asset in various applications across different industries.

Word count: 486

Listen Sie 10 häufige Fragen und Antworten im Zusammenhang mit der Anwendung von V230LS10CP in technischen Lösungen auf

  1. What is V230LS10CP?

    • V230LS10CP is a varistor, also known as a voltage-dependent resistor, that is commonly used to protect electronic circuits from overvoltage conditions.

  2. What is the maximum voltage rating of V230LS10CP?

    • The maximum voltage rating of V230LS10CP is 230V.

  3. What is the typical application of V230LS10CP?

    • V230LS10CP is typically used in surge protection devices, power supplies, and electronic equipment to suppress transient voltage spikes.

  4. How does V230LS10CP function in a circuit?

    • V230LS10CP acts as a voltage-dependent switch, conducting current when the voltage across it exceeds its threshold, thereby diverting excess energy away from sensitive components.

  5. What are the key specifications of V230LS10CP?

    • The key specifications include its maximum voltage rating, maximum peak current capability, response time, and energy absorption capacity.

  6. Can V230LS10CP be used for outdoor applications?

    • Yes, V230LS10CP can be used for outdoor applications, but it should be housed in an appropriate enclosure to protect it from environmental factors.

  7. Is V230LS10CP suitable for use in high-power applications?

    • V230LS10CP is more suitable for low to medium power applications. For high-power applications, other varistors with higher energy absorption capabilities may be more appropriate.

  8. What are the potential failure modes of V230LS10CP?

    • Common failure modes include thermal runaway under sustained overvoltage conditions and degradation of its clamping characteristics over time.

  9. Are there any special considerations for soldering V230LS10CP onto a PCB?

    • It is important to follow the recommended soldering profile and ensure that the varistor is not subjected to excessive mechanical stress during assembly.

  10. Where can I find detailed application notes for using V230LS10CP in technical solutions?

    • Detailed application notes and guidelines for using V230LS10CP can be found in the manufacturer's datasheet and application guides, which provide specific recommendations for different circuit configurations and operating conditions.