Linear Technology/QD Devices
Das Bild kann eine Darstellung sein.
Siehe Spezifikationen für Produktdetails.
LTC4226IUD-2#PBF
Im Detail sehen Datenblätter

LTC4226IUD-2#PBF

Product Overview

Category

LTC4226IUD-2#PBF belongs to the category of integrated circuits (ICs).

Use

This product is commonly used in electronic devices for power management and protection purposes.

Characteristics

The LTC4226IUD-2#PBF IC offers advanced features such as overvoltage protection, undervoltage lockout, and reverse current blocking. It is designed to ensure safe and reliable operation of electronic systems.

Package

The LTC4226IUD-2#PBF is available in a small form factor package, which makes it suitable for space-constrained applications.

Essence

The essence of LTC4226IUD-2#PBF lies in its ability to protect electronic devices from potential damage caused by voltage fluctuations and reverse currents.

Packaging/Quantity

This product is typically sold in reels or tubes, with a quantity of 250 units per reel/tube.

Specifications

The LTC4226IUD-2#PBF has the following specifications:

  • Input Voltage Range: 2.7V to 5.5V
  • Operating Temperature Range: -40°C to 85°C
  • Maximum Output Current: 2A
  • Overvoltage Protection Threshold: Adjustable
  • Undervoltage Lockout Threshold: Adjustable
  • Reverse Current Blocking: Yes
  • Quiescent Current: 20µA (typical)

Detailed Pin Configuration

The LTC4226IUD-2#PBF IC has the following pin configuration:

  1. VIN: Input Voltage
  2. GATE1: Gate Control for Channel 1
  3. GATE2: Gate Control for Channel 2
  4. FLT1: Fault Indicator for Channel 1
  5. FLT2: Fault Indicator for Channel 2
  6. EN: Enable Pin
  7. GND: Ground
  8. VOUT: Output Voltage

Functional Features

The LTC4226IUD-2#PBF offers the following functional features:

  1. Overvoltage Protection: Monitors the input voltage and shuts down the output when it exceeds a set threshold.
  2. Undervoltage Lockout: Ensures that the output is disabled when the input voltage falls below a certain threshold.
  3. Reverse Current Blocking: Prevents reverse current flow from the output to the input, protecting the system from potential damage.
  4. Fault Indicators: Provide visual indication of any fault conditions in each channel.
  5. Enable Pin: Allows for easy control of the IC's operation.

Advantages and Disadvantages

Advantages

  • Provides robust protection against overvoltage and reverse currents.
  • Small form factor package enables usage in space-constrained applications.
  • Adjustable thresholds allow customization based on specific requirements.
  • Fault indicators aid in troubleshooting and maintenance.

Disadvantages

  • Limited maximum output current of 2A may not be suitable for high-power applications.
  • Operating temperature range may restrict usage in extreme environments.

Working Principles

The LTC4226IUD-2#PBF operates by continuously monitoring the input voltage and comparing it with the set thresholds for overvoltage protection and undervoltage lockout. When the input voltage exceeds the overvoltage threshold, the IC shuts down the output to prevent damage. Similarly, if the input voltage falls below the undervoltage threshold, the output is disabled. The reverse current blocking feature ensures that no current flows from the output to the input, safeguarding the system.

Detailed Application Field Plans

The LTC4226IUD-2#PBF finds application in various electronic devices where power management and protection are crucial. Some specific application fields include:

  1. Battery-powered devices: Protects the device from overvoltage conditions and prevents reverse current flow, extending battery life.
  2. Industrial control systems: Ensures reliable operation by safeguarding against voltage fluctuations and reverse currents.
  3. Automotive electronics: Provides protection to sensitive electronic components from potential damage caused by voltage spikes or reverse currents.

Detailed and Complete Alternative Models

  1. LTC4226IUD-1#PBF: Similar to LTC4226IUD-2#PBF, but with a different maximum output current rating of 1A.
  2. LTC4226IUD-3#PBF: Offers higher maximum output current of 3A, suitable for applications requiring more power.
  3. LTC4226IUD-4#PBF: Provides adjustable overvoltage and undervoltage thresholds, allowing for greater customization.

These alternative models offer similar functionality with slight variations in specifications, catering to different application requirements.

In conclusion, the LTC4226IUD-2#PBF is an integrated circuit designed for power management and protection in electronic devices. Its advanced features, small form factor package, and adjustable thresholds make it a reliable choice for various applications. However

Listen Sie 10 häufige Fragen und Antworten im Zusammenhang mit der Anwendung von LTC4226IUD-2#PBF in technischen Lösungen auf

Sure! Here are 10 common questions and answers related to the application of LTC4226IUD-2#PBF in technical solutions:

  1. Q: What is LTC4226IUD-2#PBF? A: LTC4226IUD-2#PBF is a specific model number for a power supply IC manufactured by Linear Technology (now part of Analog Devices). It is designed for hot-swappable applications and provides protection against reverse voltage, overcurrent, and overvoltage.

  2. Q: What are the key features of LTC4226IUD-2#PBF? A: The key features of LTC4226IUD-2#PBF include dual ideal diode controllers, adjustable current limit, undervoltage lockout, thermal shutdown, and fault reporting.

  3. Q: How does LTC4226IUD-2#PBF enable hot-swapping capability? A: LTC4226IUD-2#PBF uses its dual ideal diode controllers to allow seamless insertion and removal of power sources without causing any disruption to the load.

  4. Q: What is the maximum current rating of LTC4226IUD-2#PBF? A: LTC4226IUD-2#PBF has a maximum current rating of 5A per channel.

  5. Q: Can LTC4226IUD-2#PBF be used with both AC and DC power sources? A: Yes, LTC4226IUD-2#PBF can be used with both AC and DC power sources, as long as they fall within the specified voltage and current limits.

  6. Q: How does LTC4226IUD-2#PBF protect against reverse voltage? A: LTC4226IUD-2#PBF incorporates reverse voltage protection by using its ideal diode controllers to prevent current flow in the reverse direction.

  7. Q: Can LTC4226IUD-2#PBF be used in battery charging applications? A: Yes, LTC4226IUD-2#PBF can be used in battery charging applications as it provides overcurrent and overvoltage protection, ensuring safe charging operations.

  8. Q: What is the operating temperature range of LTC4226IUD-2#PBF? A: The operating temperature range of LTC4226IUD-2#PBF is typically -40°C to +85°C.

  9. Q: Does LTC4226IUD-2#PBF require any external components for operation? A: Yes, LTC4226IUD-2#PBF requires external MOSFETs, sense resistors, and capacitors for proper operation.

  10. Q: Are there any application notes or reference designs available for LTC4226IUD-2#PBF? A: Yes, Analog Devices provides application notes and reference designs on their website that can help users understand and implement LTC4226IUD-2#PBF in various technical solutions.

Please note that the answers provided here are general and may vary depending on specific design requirements and application scenarios. It is always recommended to refer to the datasheet and relevant documentation for accurate information.