Siehe Spezifikationen für Produktdetails.
LTC2980CY
Product Overview
- Category: Integrated Circuit (IC)
- Use: Temperature-to-Digital Converter
- Characteristics: High accuracy, wide temperature range, small package size
- Package: Ceramic 16-Lead LQFN
- Essence: Converts temperature to digital data for various applications
- Packaging/Quantity: Available in reels of 2500 units
Specifications
- Temperature Range: -40°C to +125°C
- Resolution: 0.0078°C
- Accuracy: ±0.25°C (typical)
- Supply Voltage: 2.7V to 5.5V
- Interface: I2C/SMBus compatible
- Conversion Time: 200ms (typical)
Pin Configuration
The LTC2980CY has a total of 16 pins. The pin configuration is as follows:
- VDD: Power supply input
- GND: Ground
- SDA: Serial Data Input/Output
- SCL: Serial Clock Input
- ALERT: Alert Output
- AIN1: Analog Input Channel 1
- AIN2: Analog Input Channel 2
- AIN3: Analog Input Channel 3
- AIN4: Analog Input Channel 4
- AIN5: Analog Input Channel 5
- AIN6: Analog Input Channel 6
- AIN7: Analog Input Channel 7
- AIN8: Analog Input Channel 8
- REF: Reference Voltage Output
- VIO: Digital Supply Voltage
- ADIN: External Analog Input
Functional Features
- High-resolution temperature measurement
- Wide temperature range coverage
- Low power consumption
- Easy integration with microcontrollers
- Configurable alert output for temperature threshold detection
Advantages and Disadvantages
Advantages
- High accuracy temperature measurement
- Small package size for space-constrained applications
- Wide temperature range coverage suitable for various environments
- Low power consumption for energy-efficient designs
- Flexible interface options for easy integration
Disadvantages
- Limited analog input channels (8 channels)
- Requires external analog input for temperature sensing
Working Principles
The LTC2980CY is based on a sigma-delta ADC architecture. It utilizes an internal temperature sensor and an analog front-end to convert the analog temperature signal into digital data. The device incorporates a digital signal processing engine that performs linearization, calibration, and conversion of the temperature data. The converted digital temperature values are then made available through the I2C/SMBus interface.
Detailed Application Field Plans
The LTC2980CY can be used in various applications where accurate temperature measurement is required. Some potential application fields include:
- Industrial process control systems
- HVAC (Heating, Ventilation, and Air Conditioning) systems
- Medical equipment
- Automotive electronics
- Power management systems
- Environmental monitoring devices
Detailed and Complete Alternative Models
- MAX31865: Temperature-to-Digital Converter with RTD Sensor Interface
- MCP9808: High Accuracy I2C Temperature Sensor
- TMP117: High Precision Digital Temperature Sensor
- ADT7420: ±0.25°C Accurate, 16-Bit Digital I2C Temperature Sensor
- DS18B20: Programmable Resolution 1-Wire Digital Thermometer
These alternative models offer similar functionality and can be considered as alternatives to the LTC2980CY depending on specific requirements and design constraints.
Word count: 389 words
Listen Sie 10 häufige Fragen und Antworten im Zusammenhang mit der Anwendung von LTC2980CY in technischen Lösungen auf
Sure! Here are 10 common questions and answers related to the application of LTC2980CY in technical solutions:
Q: What is LTC2980CY? A: LTC2980CY is a high-performance digital temperature measurement system from Linear Technology (now part of Analog Devices). It is designed for precision temperature sensing applications.
Q: What are the key features of LTC2980CY? A: The key features of LTC2980CY include 20-bit resolution, ±0.25°C accuracy, support for multiple temperature sensors, built-in nonlinearity correction, and a wide operating temperature range.
Q: How does LTC2980CY interface with temperature sensors? A: LTC2980CY supports various types of temperature sensors such as thermocouples, RTDs, thermistors, and diodes. It provides the necessary excitation currents and voltage references for accurate measurements.
Q: Can LTC2980CY measure multiple temperature sensors simultaneously? A: Yes, LTC2980CY can measure up to 20 temperature sensors simultaneously. It has multiple input channels and can handle different sensor types on each channel.
Q: Is LTC2980CY suitable for high-temperature applications? A: Yes, LTC2980CY is designed to operate in a wide temperature range, typically from -40°C to 125°C. It can be used in both low-temperature and high-temperature environments.
Q: Does LTC2980CY require external calibration? A: LTC2980CY has built-in nonlinearity correction and self-calibration capabilities. However, for optimal accuracy, it is recommended to perform periodic external calibration using known temperature references.
Q: Can LTC2980CY communicate with microcontrollers or other devices? A: Yes, LTC2980CY supports I2C communication protocol, allowing it to interface with microcontrollers, processors, or other devices for data acquisition and control purposes.
Q: What is the power supply requirement for LTC2980CY? A: LTC2980CY operates from a single power supply voltage ranging from 2.7V to 5.5V. It consumes low power and has sleep modes to conserve energy.
Q: Are there any evaluation boards or development kits available for LTC2980CY? A: Yes, Analog Devices provides evaluation boards and development kits for LTC2980CY, which include software tools, documentation, and example code to facilitate the design and testing process.
Q: What are some typical applications of LTC2980CY? A: LTC2980CY can be used in various applications such as industrial process control, medical equipment, automotive systems, aerospace, scientific research, and any other application that requires accurate temperature measurements.
Please note that these answers are general and may vary depending on specific requirements and use cases.