Intersil
Das Bild kann eine Darstellung sein.
Siehe Spezifikationen für Produktdetails.
X9313UMT1
Im Detail sehen Datenblätter

X9313UMT1

Product Overview

  • Category: Integrated Circuit (IC)
  • Use: Digital Potentiometer
  • Characteristics: Non-volatile, 32-tap, 3-wire interface
  • Package: SOT-23-8
  • Essence: X9313UMT1 is a digital potentiometer IC that provides a variable resistance for electronic circuits. It can be used to replace mechanical potentiometers in various applications.
  • Packaging/Quantity: The X9313UMT1 is available in tape and reel packaging with 3000 units per reel.

Specifications

  • Resolution: 32 taps
  • Resistance Range: 0 to 10kΩ
  • Supply Voltage: 2.7V to 5.5V
  • Interface: 3-wire serial
  • Operating Temperature Range: -40°C to +85°C

Detailed Pin Configuration

The X9313UMT1 has the following pin configuration:

┌───┐ VCC │1 8│ VSS CS │2 7│ H U/D│3 6│ W INC│4 5│ B └───┘

  • Pin 1: VCC - Power supply voltage
  • Pin 2: CS - Chip select input
  • Pin 3: U/D - Up/Down control input
  • Pin 4: INC - Increment control input
  • Pin 5: B - Terminal B of the potentiometer
  • Pin 6: W - Wiper terminal of the potentiometer
  • Pin 7: H - Terminal H of the potentiometer
  • Pin 8: VSS - Ground

Functional Features

  • Non-volatile memory: The X9313UMT1 retains its settings even when power is removed.
  • 32-tap resolution: Provides fine-grained control over the resistance value.
  • 3-wire interface: Simple and easy to integrate into existing circuits.
  • Low power consumption: Suitable for battery-powered applications.

Advantages and Disadvantages

Advantages: - Non-volatile memory ensures settings are retained. - Fine-grained control with 32-tap resolution. - Easy integration with a simple 3-wire interface. - Low power consumption extends battery life.

Disadvantages: - Limited resistance range of 0 to 10kΩ. - SOT-23-8 package may require additional space compared to smaller packages.

Working Principles

The X9313UMT1 digital potentiometer works by using a series of resistive elements and switches controlled by the internal circuitry. The position of the wiper terminal determines the resistance value between terminals B and H. The control inputs (CS, U/D, INC) allow the user to adjust the wiper position digitally, providing precise resistance control.

Detailed Application Field Plans

The X9313UMT1 can be used in various applications, including:

  1. Audio equipment: Volume control, tone adjustment.
  2. Industrial automation: Calibration, feedback control.
  3. Test and measurement instruments: Fine-tuning resistance values.
  4. Consumer electronics: Brightness control, contrast adjustment.

Detailed and Complete Alternative Models

  1. X9C103S: Similar digital potentiometer IC with 100 taps and 3-wire interface.
  2. MCP401X: Digital potentiometer IC with 256 taps and SPI interface.
  3. AD8403: Digital potentiometer IC with 64 taps and I2C interface.

These alternative models offer different specifications and interfaces, allowing users to choose the most suitable option for their specific requirements.

Word count: 410 words

Listen Sie 10 häufige Fragen und Antworten im Zusammenhang mit der Anwendung von X9313UMT1 in technischen Lösungen auf

Sure! Here are 10 common questions and answers related to the application of X9313UMT1 in technical solutions:

Q1: What is the X9313UMT1? A1: The X9313UMT1 is a digital potentiometer, which is an integrated circuit that can be used to adjust resistance electronically.

Q2: What are the key features of the X9313UMT1? A2: The key features of the X9313UMT1 include 32 tap points, non-volatile memory, low power consumption, and a wide operating voltage range.

Q3: How can I control the X9313UMT1? A3: The X9313UMT1 can be controlled using a microcontroller or any other digital device through its serial interface.

Q4: What is the purpose of the non-volatile memory in the X9313UMT1? A4: The non-volatile memory allows the X9313UMT1 to retain its settings even when power is removed, ensuring that the desired resistance value is maintained.

Q5: Can the X9313UMT1 be used as a variable resistor? A5: Yes, the X9313UMT1 can be used as a variable resistor by adjusting the tap point digitally.

Q6: What is the resolution of the X9313UMT1? A6: The X9313UMT1 has a resolution of 32 tap points, allowing for precise adjustment of resistance.

Q7: What is the typical power supply voltage for the X9313UMT1? A7: The X9313UMT1 typically operates at a power supply voltage between 2.7V and 5.5V.

Q8: Can the X9313UMT1 be used in low-power applications? A8: Yes, the X9313UMT1 has low power consumption, making it suitable for use in low-power applications.

Q9: Can multiple X9313UMT1 devices be connected together? A9: Yes, multiple X9313UMT1 devices can be connected together to achieve higher resolution or control multiple channels simultaneously.

Q10: What are some common applications of the X9313UMT1? A10: The X9313UMT1 is commonly used in audio equipment, instrumentation, industrial control systems, and other applications where precise resistance adjustment is required.

Please note that these questions and answers are general and may vary depending on specific requirements and use cases.