Intersil
Das Bild kann eine Darstellung sein.
Siehe Spezifikationen für Produktdetails.
CS82C52Z
Im Detail sehen Datenblätter

CS82C52Z

Product Overview

  • Category: Integrated Circuit (IC)
  • Use: Microcontroller
  • Characteristics: High-performance, 8-bit microcontroller with advanced features
  • Package: DIP (Dual In-line Package)
  • Essence: The CS82C52Z is a versatile microcontroller designed for various applications requiring high performance and advanced features.
  • Packaging/Quantity: Available in standard DIP package, typically sold in packs of 10.

Specifications

  • Architecture: 8-bit
  • Clock Speed: Up to 20 MHz
  • Program Memory: 4 KB ROM
  • Data Memory: 128 bytes RAM
  • I/O Pins: 32
  • Timers/Counters: 2
  • Serial Communication: UART (Universal Asynchronous Receiver Transmitter)
  • Interrupts: 6 external, 2 internal
  • Operating Voltage: 3.3V - 5V

Detailed Pin Configuration

The CS82C52Z has a total of 40 pins, each serving a specific purpose. Here is the detailed pin configuration:

  1. VCC: Power supply voltage
  2. GND: Ground
  3. XTAL1: Crystal oscillator input
  4. XTAL2: Crystal oscillator output
  5. RESET: Reset input
  6. INT0: External interrupt 0 input
  7. INT1: External interrupt 1 input
  8. T0: Timer 0 input/output
  9. T1: Timer 1 input/output
  10. WR: Write control signal
  11. RD: Read control signal
  12. ALE: Address latch enable
  13. PSEN: Program store enable
  14. EA/VPP: External access enable/Voltage programming pin 15-22. Port 0 (P0): General-purpose I/O pins 23-30. Port 1 (P1): General-purpose I/O pins 31-38. Port 2 (P2): General-purpose I/O pins 39-40. Port 3 (P3): General-purpose I/O pins

Functional Features

  • High-performance 8-bit microcontroller with advanced architecture
  • Wide operating voltage range for flexibility in various applications
  • On-chip program memory and data memory for efficient execution of instructions
  • Multiple I/O pins for interfacing with external devices
  • Built-in timers/counters for precise timing operations
  • UART for serial communication with other devices
  • Interrupt capability for handling real-time events
  • Low power consumption for energy-efficient operation

Advantages and Disadvantages

Advantages: - High performance and advanced features - Versatile and flexible for various applications - Efficient use of program and data memory - Precise timing operations with built-in timers/counters - Serial communication capability - Interrupt handling for real-time events

Disadvantages: - Limited program memory (4 KB ROM) - Limited data memory (128 bytes RAM) - Relatively small number of I/O pins compared to some other microcontrollers

Working Principles

The CS82C52Z operates based on an 8-bit architecture, where it executes instructions stored in its program memory. It uses a clock signal provided by an external crystal oscillator to synchronize its operations. The microcontroller communicates with external devices through its I/O pins and can perform various tasks using its timers/counters, UART, and interrupt capabilities.

Detailed Application Field Plans

The CS82C52Z can be used in a wide range of applications, including but not limited to: - Industrial automation systems - Home automation systems - Robotics - Automotive electronics - Consumer electronics - Medical devices - Security systems

Detailed and Complete Alternative Models

  • CS80C52
  • AT89C52
  • PIC16F877A
  • STM8S103F3

These alternative models offer similar functionalities and can be considered as alternatives to the CS82C52Z depending on specific requirements and preferences.

Note: The content provided above is a sample structure for an encyclopedia entry. The actual content may vary based on the availability of information and specific requirements.

Listen Sie 10 häufige Fragen und Antworten im Zusammenhang mit der Anwendung von CS82C52Z in technischen Lösungen auf

Sure! Here are 10 common questions and answers related to the application of CS82C52Z in technical solutions:

  1. Q: What is CS82C52Z? A: CS82C52Z is a microcontroller chip designed for embedded systems applications.

  2. Q: What are the key features of CS82C52Z? A: CS82C52Z features an 8-bit CPU, on-chip RAM and ROM, multiple I/O ports, timers, and serial communication interfaces.

  3. Q: What are some typical applications of CS82C52Z? A: CS82C52Z is commonly used in industrial automation, home appliances, automotive systems, and various control systems.

  4. Q: How much memory does CS82C52Z have? A: CS82C52Z has 256 bytes of on-chip RAM and 8 KB of on-chip ROM.

  5. Q: Can CS82C52Z be programmed in C or assembly language? A: Yes, CS82C52Z can be programmed using both C and assembly language.

  6. Q: Does CS82C52Z support interrupts? A: Yes, CS82C52Z supports both external and internal interrupts.

  7. Q: What is the maximum clock frequency of CS82C52Z? A: The maximum clock frequency of CS82C52Z is typically 12 MHz.

  8. Q: Can CS82C52Z communicate with other devices? A: Yes, CS82C52Z has built-in UART (Universal Asynchronous Receiver/Transmitter) for serial communication.

  9. Q: Is CS82C52Z programmable in-system or does it require external programming equipment? A: CS82C52Z requires external programming equipment for programming.

  10. Q: Are there any development tools available for CS82C52Z? A: Yes, there are various development tools and IDEs (Integrated Development Environments) available for programming and debugging CS82C52Z-based applications.

Please note that the answers provided here are general and may vary depending on the specific implementation and datasheet of CS82C52Z.