Siehe Spezifikationen für Produktdetails.
XC2263N40F80LABKXUMA1
Basic Information Overview
- Category: Integrated Circuit (IC)
- Use: Microcontroller Unit (MCU)
- Characteristics: High-performance, low-power consumption, advanced peripherals
- Package: LQFP-80
- Essence: 32-bit MCU with embedded Flash memory
- Packaging/Quantity: Tape and reel, 2500 units per reel
Specifications
- Architecture: ARM Cortex-M4
- Clock Frequency: 40 MHz
- Flash Memory: 256 KB
- RAM: 40 KB
- Operating Voltage: 2.7V - 5.5V
- I/O Pins: 56
- Communication Interfaces: UART, SPI, I2C, LIN
- Analog-to-Digital Converter (ADC): 12-bit, 16 channels
- Timers: 16-bit and 32-bit timers
- Operating Temperature Range: -40°C to +85°C
Detailed Pin Configuration
The XC2263N40F80LABKXUMA1 has a total of 80 pins. The pin configuration is as follows:
| Pin Number | Pin Name | Function | |------------|----------|----------| | 1 | VDD | Power Supply (2.7V - 5.5V) | | 2 | GND | Ground | | 3 | P0.0 | General Purpose I/O | | 4 | P0.1 | General Purpose I/O | | ... | ... | ... | | 79 | P3.6 | General Purpose I/O | | 80 | P3.7 | General Purpose I/O |
Functional Features
- High-performance ARM Cortex-M4 core for efficient processing
- Advanced peripherals for versatile applications
- Low-power consumption for energy-efficient designs
- Extensive communication interfaces for connectivity options
- Rich set of timers for precise timing control
- High-resolution ADC for accurate analog measurements
- Flexible I/O pins for various input/output configurations
Advantages and Disadvantages
Advantages: - Powerful processing capabilities due to the ARM Cortex-M4 core - Wide range of communication interfaces for seamless integration with other devices - Low-power consumption extends battery life in portable applications - Ample Flash memory and RAM for storing and executing complex programs - Versatile I/O pins enable flexible interfacing with external components
Disadvantages: - Limited package options, only available in LQFP-80 - Relatively small amount of Flash memory compared to some other MCUs in the same category - Higher cost compared to lower-end microcontrollers
Working Principles
The XC2263N40F80LABKXUMA1 operates based on the ARM Cortex-M4 architecture. It executes instructions stored in its embedded Flash memory, utilizing the advanced peripherals and resources to perform various tasks. The MCU communicates with external devices through its communication interfaces, processes data using its processing core, and controls timing and synchronization using its timers. The analog-to-digital converter allows the MCU to convert analog signals into digital values for further processing.
Detailed Application Field Plans
The XC2263N40F80LABKXUMA1 is suitable for a wide range of applications, including but not limited to: - Industrial automation - Automotive systems - Consumer electronics - Internet of Things (IoT) devices - Medical equipment - Home appliances
Detailed and Complete Alternative Models
Some alternative models that offer similar functionality to the XC2263N40F80LABKXUMA1 are: - STM32F407VG from STMicroelectronics - PIC32MX795F512L from Microchip Technology - LPC1768 from NXP Semiconductors - MSP432P401R from Texas Instruments
(Note: The alternative models listed above are for reference purposes and may have different specifications and pin configurations. It is recommended to consult the respective datasheets for detailed information.)
Word count: 450 words
Listen Sie 10 häufige Fragen und Antworten im Zusammenhang mit der Anwendung von XC2263N40F80LABKXUMA1 in technischen Lösungen auf
Sure! Here are 10 common questions and answers related to the application of XC2263N40F80LABKXUMA1 in technical solutions:
Q1: What is XC2263N40F80LABKXUMA1? A1: XC2263N40F80LABKXUMA1 is a microcontroller chip manufactured by Infineon Technologies. It is commonly used in various technical solutions.
Q2: What are the key features of XC2263N40F80LABKXUMA1? A2: Some key features of XC2263N40F80LABKXUMA1 include a 32-bit TriCore CPU, 40 MHz clock frequency, 80 KB RAM, and various integrated peripherals.
Q3: What are the typical applications of XC2263N40F80LABKXUMA1? A3: XC2263N40F80LABKXUMA1 is often used in automotive systems, industrial automation, motor control, and other embedded applications.
Q4: Can XC2263N40F80LABKXUMA1 be programmed using C/C++? A4: Yes, XC2263N40F80LABKXUMA1 can be programmed using C/C++ programming languages along with appropriate development tools.
Q5: Does XC2263N40F80LABKXUMA1 support real-time operating systems (RTOS)? A5: Yes, XC2263N40F80LABKXUMA1 supports various RTOS options, allowing developers to implement real-time functionality in their applications.
Q6: What communication interfaces are available on XC2263N40F80LABKXUMA1? A6: XC2263N40F80LABKXUMA1 offers multiple communication interfaces such as SPI, I2C, LIN, CAN, and UART, enabling seamless connectivity with other devices.
Q7: Can XC2263N40F80LABKXUMA1 handle motor control applications? A7: Yes, XC2263N40F80LABKXUMA1 is well-suited for motor control applications due to its integrated PWM modules and high-performance CPU.
Q8: Is XC2263N40F80LABKXUMA1 suitable for safety-critical systems? A8: Yes, XC2263N40F80LABKXUMA1 meets the requirements of functional safety standards like ISO 26262, making it suitable for safety-critical applications.
Q9: What development tools are available for programming XC2263N40F80LABKXUMA1? A9: Infineon provides a range of development tools, including compilers, debuggers, and integrated development environments (IDEs), specifically designed for XC2263N40F80LABKXUMA1.
Q10: Where can I find more information about XC2263N40F80LABKXUMA1? A10: You can refer to the official documentation and datasheets provided by Infineon Technologies or visit their website for detailed information about XC2263N40F80LABKXUMA1.