Das Bild kann eine Darstellung sein.
Siehe Spezifikationen für Produktdetails.
SGP02N120XKSA1

SGP02N120XKSA1

Product Overview

SGP02N120XKSA1 belongs to the category of power MOSFETs and is commonly used in electronic circuits for switching and amplification purposes. This MOSFET is known for its high voltage and current handling capabilities, making it suitable for various power applications. The device is characterized by its low on-state resistance, high switching speed, and robust packaging, which ensures efficient heat dissipation.

Basic Information

  • Category: Power MOSFET
  • Use: Switching and amplification in electronic circuits
  • Characteristics: Low on-state resistance, high voltage and current handling capabilities, high switching speed
  • Package: TO-220 Full Pack
  • Essence: Efficient power handling and heat dissipation
  • Packaging/Quantity: Typically packaged individually or in reels for bulk quantities

Specifications

  • Voltage Rating: 120V
  • Current Rating: 2A
  • On-State Resistance (RDS(on)): 0.35 ohms
  • Gate Threshold Voltage: 2.5V
  • Maximum Power Dissipation: 50W
  • Operating Temperature Range: -55°C to 175°C

Detailed Pin Configuration

The SGP02N120XKSA1 MOSFET has a standard TO-220 pin configuration with three pins: gate (G), drain (D), and source (S).

  • Pin 1 (G): Gate terminal for controlling the MOSFET
  • Pin 2 (D): Drain terminal for power input/output
  • Pin 3 (S): Source terminal for ground/reference connection

Functional Features

  • High voltage and current handling capabilities
  • Low on-state resistance for minimal power loss
  • Fast switching speed for efficient operation
  • Robust TO-220 packaging for effective heat dissipation

Advantages and Disadvantages

Advantages

  • High power handling capacity
  • Low on-state resistance for efficient conduction
  • Fast switching speed for responsive operation
  • Robust packaging for effective heat dissipation

Disadvantages

  • Higher cost compared to lower-rated MOSFETs
  • Higher gate threshold voltage may require specific drive circuitry

Working Principles

The SGP02N120XKSA1 operates based on the principles of field-effect transistors, where the gate voltage controls the flow of current between the drain and source terminals. When a sufficient gate voltage is applied, the MOSFET conducts current with minimal resistance, allowing power to flow through the circuit. Its fast switching speed enables rapid transitions between on and off states, making it suitable for high-frequency applications.

Detailed Application Field Plans

The SGP02N120XKSA1 is widely used in various power electronics applications, including: - Switch-mode power supplies - Motor control circuits - Inverters and converters - Audio amplifiers - LED lighting systems

Detailed and Complete Alternative Models

  • IRF540N
  • FDP8870
  • STP80NF55-06

In conclusion, the SGP02N120XKSA1 power MOSFET offers high-performance characteristics suitable for demanding power applications. Its robust design, high voltage rating, and low on-state resistance make it a preferred choice for various electronic circuits requiring efficient power handling and switching capabilities.

Word Count: 511

Listen Sie 10 häufige Fragen und Antworten im Zusammenhang mit der Anwendung von SGP02N120XKSA1 in technischen Lösungen auf

  1. What is the maximum voltage rating of SGP02N120XKSA1?

    • The maximum voltage rating of SGP02N120XKSA1 is 1200V.
  2. What is the continuous drain current of SGP02N120XKSA1?

    • The continuous drain current of SGP02N120XKSA1 is typically 2A.
  3. What type of package does SGP02N120XKSA1 come in?

    • SGP02N120XKSA1 comes in a TO-220AB package.
  4. What is the on-state resistance of SGP02N120XKSA1?

    • The on-state resistance of SGP02N120XKSA1 is typically 2 ohms.
  5. Is SGP02N120XKSA1 suitable for high-frequency switching applications?

    • Yes, SGP02N120XKSA1 is suitable for high-frequency switching applications due to its low on-state resistance.
  6. What are the typical applications of SGP02N120XKSA1?

    • SGP02N120XKSA1 is commonly used in power supplies, motor control, and lighting applications.
  7. Does SGP02N120XKSA1 have built-in protection features?

    • SGP02N120XKSA1 does not have built-in protection features and may require external circuitry for overcurrent or overvoltage protection.
  8. What is the operating temperature range of SGP02N120XKSA1?

    • The operating temperature range of SGP02N120XKSA1 is typically -55°C to 150°C.
  9. Can SGP02N120XKSA1 be used in automotive applications?

    • Yes, SGP02N120XKSA1 can be used in automotive applications due to its rugged construction and high voltage rating.
  10. Is SGP02N120XKSA1 RoHS compliant?

    • Yes, SGP02N120XKSA1 is RoHS compliant, making it suitable for environmentally conscious designs.