Infineon Technologies
Das Bild kann eine Darstellung sein.
Siehe Spezifikationen für Produktdetails.
IRF9321PBF
Im Detail sehen Datenblätter

IRF9321PBF

Product Overview

Category: Power MOSFET
Use: Switching applications
Characteristics: High voltage, high speed switching
Package: TO-220AB
Essence: Power transistor for high-speed power switching applications
Packaging/Quantity: Bulk packaging, quantity varies

Specifications

  • Voltage Rating: 200V
  • Current Rating: 6.5A
  • RDS(ON): 0.45 Ohm
  • Gate Charge (Qg): 18nC
  • Operating Temperature Range: -55°C to 175°C

Detailed Pin Configuration

The IRF9321PBF has a standard TO-220AB pin configuration with three pins: gate, drain, and source.

Functional Features

  • Fast switching speed
  • Low RDS(ON) for reduced conduction losses
  • High voltage rating for robustness in various applications
  • Low gate charge for improved efficiency

Advantages

  • Suitable for high-speed power switching applications
  • Robust voltage and current ratings
  • Low on-state resistance for minimal power dissipation

Disadvantages

  • Relatively high gate charge compared to some alternative models
  • Limited current rating compared to higher-power devices

Working Principles

The IRF9321PBF operates based on the principles of field-effect transistors, utilizing its gate, drain, and source terminals to control the flow of current in high-speed switching applications.

Detailed Application Field Plans

The IRF9321PBF is commonly used in: - Switch-mode power supplies - DC-DC converters - Motor control systems - Inverters

Detailed and Complete Alternative Models

Some alternative models to the IRF9321PBF include: - IRF9310PBF - IRF9330PBF - IRF9340PBF

In conclusion, the IRF9321PBF is a power MOSFET designed for high-speed switching applications, offering robust voltage and current ratings, fast switching speed, and low on-state resistance. While it has some limitations such as relatively high gate charge and limited current rating, it remains a popular choice for various power electronics applications.

Listen Sie 10 häufige Fragen und Antworten im Zusammenhang mit der Anwendung von IRF9321PBF in technischen Lösungen auf

  1. What is the IRF9321PBF?

    • The IRF9321PBF is a power MOSFET transistor designed for high-speed switching applications in power supplies, motor control, and other electronic systems.

  2. What is the maximum drain-source voltage of the IRF9321PBF?

    • The maximum drain-source voltage of the IRF9321PBF is 200 volts.

  3. What is the continuous drain current rating of the IRF9321PBF?

    • The continuous drain current rating of the IRF9321PBF is 6.5 amperes.

  4. What is the on-state resistance (RDS(on)) of the IRF9321PBF?

    • The on-state resistance of the IRF9321PBF is typically around 0.45 ohms.

  5. What are some typical applications for the IRF9321PBF?

    • Typical applications for the IRF9321PBF include power supplies, DC-DC converters, motor control, and electronic load switches.

  6. What is the gate-source voltage range for proper operation of the IRF9321PBF?

    • The gate-source voltage range for proper operation of the IRF9321PBF is typically between -20 volts and +20 volts.

  7. Does the IRF9321PBF require a heat sink for certain applications?

    • Yes, for high-power or high-frequency applications, the IRF9321PBF may require a heat sink to dissipate heat effectively.

  8. What are the thermal characteristics of the IRF9321PBF?

    • The thermal resistance from junction to case (RθJC) of the IRF9321PBF is typically around 3.1°C/W.

  9. Is the IRF9321PBF suitable for automotive applications?

    • Yes, the IRF9321PBF is suitable for automotive applications, provided it meets the specific requirements and standards for automotive electronics.

  10. Where can I find the detailed datasheet for the IRF9321PBF?

    • The detailed datasheet for the IRF9321PBF can be found on the manufacturer's website or through authorized distributors.