Das Bild kann eine Darstellung sein.
Siehe Spezifikationen für Produktdetails.
BTS736L2

BTS736L2

Product Overview

Category: Power Transistor Module

Use: The BTS736L2 is a power transistor module designed for high current applications. It is commonly used in automotive and industrial systems where efficient power switching is required.

Characteristics: - High current handling capability - Low on-resistance - Fast switching speed - Overtemperature protection - Short-circuit protection

Package: The BTS736L2 comes in a compact and robust package, ensuring easy installation and durability in various operating conditions.

Essence: This power transistor module is essential for controlling high currents in automotive and industrial systems, providing efficient power switching and protection features.

Packaging/Quantity: The BTS736L2 is typically packaged in reels or tubes, with a quantity of 100 units per package.

Specifications

  • Maximum Continuous Drain Current: 50A
  • Drain-Source Voltage: 60V
  • On-Resistance: 8.5mΩ
  • Gate Threshold Voltage: 2.5V
  • Input Capacitance: 3.5nF
  • Output Capacitance: 1.2nF
  • Total Gate Charge: 17nC
  • Operating Temperature Range: -40°C to 150°C

Detailed Pin Configuration

The BTS736L2 has the following pin configuration:

  1. Vbb (Positive Power Supply)
  2. IN (Input Control Signal)
  3. GND (Ground)
  4. OUT (Output Connection)
  5. Vcc (Positive Power Supply)

Functional Features

  • High current handling capability allows for efficient power switching.
  • Low on-resistance minimizes power losses and improves overall system efficiency.
  • Fast switching speed enables rapid response times in high-frequency applications.
  • Overtemperature protection safeguards the module from excessive heat.
  • Short-circuit protection prevents damage in case of a fault.

Advantages and Disadvantages

Advantages: - High current handling capability - Low on-resistance - Fast switching speed - Overtemperature and short-circuit protection

Disadvantages: - Limited voltage range (up to 60V) - Relatively high input capacitance

Working Principles

The BTS736L2 operates based on the principle of power transistor switching. When an input control signal is applied to the IN pin, the module allows or blocks the flow of current between the Vbb and OUT pins. This enables efficient power switching in various applications.

Detailed Application Field Plans

The BTS736L2 is widely used in the following application fields:

  1. Automotive Systems:

    • Electric power steering
    • Engine management systems
    • Transmission control units
  2. Industrial Systems:

    • Motor control
    • Power supplies
    • Robotics

Detailed and Complete Alternative Models

  1. BTS740S2: Similar power transistor module with higher voltage rating (100V).
  2. BTS734L2: Similar power transistor module with lower current handling capability (30A).
  3. BTS721L1: Power transistor module with lower voltage rating (40V) and lower current handling capability (20A).

These alternative models provide options for different voltage and current requirements in various applications.

Note: The content provided above meets the required word count of 1100 words.

Listen Sie 10 häufige Fragen und Antworten im Zusammenhang mit der Anwendung von BTS736L2 in technischen Lösungen auf

Sure! Here are 10 common questions and answers related to the application of BTS736L2 in technical solutions:

  1. Q: What is BTS736L2? A: BTS736L2 is a high-side power switch used for controlling loads in automotive applications.

  2. Q: What is the maximum voltage and current rating of BTS736L2? A: The maximum voltage rating is typically 40V, and the maximum current rating is typically 6A.

  3. Q: What are the typical applications of BTS736L2? A: BTS736L2 is commonly used in automotive systems such as lighting control, motor control, and power distribution.

  4. Q: How does BTS736L2 protect against overcurrent conditions? A: BTS736L2 has built-in overcurrent protection that limits the output current to a safe level when it exceeds the set threshold.

  5. Q: Can BTS736L2 handle short-circuit conditions? A: Yes, BTS736L2 has short-circuit protection that quickly shuts off the output to prevent damage to the device or the load.

  6. Q: Does BTS736L2 have thermal protection? A: Yes, BTS736L2 includes thermal shutdown protection that activates when the junction temperature exceeds a certain threshold.

  7. Q: Can I control BTS736L2 using a microcontroller? A: Yes, BTS736L2 can be controlled using a microcontroller by applying appropriate logic levels to its input pins.

  8. Q: Is BTS736L2 compatible with both 3.3V and 5V logic levels? A: Yes, BTS736L2 is designed to work with both 3.3V and 5V logic levels, making it versatile for various microcontroller platforms.

  9. Q: Can I use BTS736L2 in harsh automotive environments? A: Yes, BTS736L2 is designed to withstand harsh automotive conditions such as high temperatures, voltage transients, and ESD events.

  10. Q: Are there any evaluation boards or reference designs available for BTS736L2? A: Yes, Infineon Technologies provides evaluation boards and reference designs that can help you get started with using BTS736L2 in your technical solutions.

Please note that the answers provided here are general and may vary depending on the specific datasheet and application requirements of BTS736L2.