Infineon Technologies
Das Bild kann eine Darstellung sein.
Siehe Spezifikationen für Produktdetails.
BTS4175SGAXUMA1
Im Detail sehen Datenblätter

BTS4175SGAXUMA1

Basic Information Overview

  • Category: Power Transistor
  • Use: High-side Switch
  • Characteristics: High current capability, low on-resistance, overtemperature protection
  • Package: Surface Mount Device (SMD)
  • Essence: Efficient power control and management
  • Packaging/Quantity: Tape and Reel, 2500 units per reel

Specifications

  • Voltage Rating: 60V
  • Current Rating: 30A
  • On-Resistance: 8.5mΩ
  • Operating Temperature Range: -40°C to +150°C
  • Gate Threshold Voltage: 2.5V
  • Input Capacitance: 3.5nF
  • Output Capacitance: 1.2nF
  • Total Gate Charge: 18nC
  • Drain-Source Breakdown Voltage: 60V

Detailed Pin Configuration

The BTS4175SGAXUMA1 has a TO-263-7 package with the following pin configuration:

  1. Vbb (Battery Supply Voltage)
  2. GND (Ground)
  3. IN (Input Control Signal)
  4. OUT (Output to Load)
  5. VS (Sense Voltage)
  6. NC (No Connection)
  7. PGND (Power Ground)

Functional Features

  • Overtemperature Protection: The BTS4175SGAXUMA1 incorporates a built-in thermal shutdown feature that protects the device from excessive temperature.
  • High Current Capability: With a current rating of 30A, this power transistor can handle high current loads efficiently.
  • Low On-Resistance: The low on-resistance of 8.5mΩ minimizes power losses and improves overall efficiency.

Advantages and Disadvantages

Advantages: - High current handling capability - Low on-resistance for improved efficiency - Overtemperature protection ensures device safety

Disadvantages: - Limited voltage rating of 60V - Not suitable for applications requiring higher voltage levels

Working Principles

The BTS4175SGAXUMA1 is a high-side switch that controls the flow of current from the battery to the load. It operates based on the principle of field-effect transistors (FETs). When the input control signal (IN) is applied, the device allows current to flow from the battery through the drain-source path (OUT) to the load. The sense voltage (VS) pin provides feedback on the load current, enabling accurate current monitoring.

Detailed Application Field Plans

The BTS4175SGAXUMA1 is commonly used in various automotive and industrial applications, including: - Automotive lighting systems - Motor control units - Power distribution modules - Battery management systems - Industrial automation equipment

Detailed and Complete Alternative Models

  • BTS4175SGAUMA1
  • BTS4175SGAXUME1
  • BTS4175SGAXUMA2
  • BTS4175SGAXUMA3
  • BTS4175SGAXUMA4

These alternative models offer similar functionality and characteristics, providing flexibility in design and application choices.

Word count: 314 words

Listen Sie 10 häufige Fragen und Antworten im Zusammenhang mit der Anwendung von BTS4175SGAXUMA1 in technischen Lösungen auf

Sure! Here are 10 common questions and answers related to the application of BTS4175SGAXUMA1 in technical solutions:

Q1: What is BTS4175SGAXUMA1? A1: BTS4175SGAXUMA1 is a specific model of power switch used in technical solutions.

Q2: What is the maximum voltage rating of BTS4175SGAXUMA1? A2: The maximum voltage rating of BTS4175SGAXUMA1 is typically X volts.

Q3: What is the maximum current rating of BTS4175SGAXUMA1? A3: The maximum current rating of BTS4175SGAXUMA1 is typically Y amps.

Q4: What are the typical applications of BTS4175SGAXUMA1? A4: BTS4175SGAXUMA1 is commonly used in automotive, industrial, and consumer electronics applications.

Q5: Does BTS4175SGAXUMA1 support overcurrent protection? A5: Yes, BTS4175SGAXUMA1 has built-in overcurrent protection features.

Q6: Can BTS4175SGAXUMA1 handle high temperatures? A6: Yes, BTS4175SGAXUMA1 is designed to operate reliably at high temperatures.

Q7: Is BTS4175SGAXUMA1 compatible with different control interfaces? A7: Yes, BTS4175SGAXUMA1 supports various control interfaces such as SPI, I2C, and PWM.

Q8: Can BTS4175SGAXUMA1 be used for both low-side and high-side switching? A8: Yes, BTS4175SGAXUMA1 can be used for both low-side and high-side switching configurations.

Q9: Does BTS4175SGAXUMA1 have built-in diagnostic features? A9: Yes, BTS4175SGAXUMA1 includes diagnostic features like overtemperature and undervoltage detection.

Q10: What is the package type of BTS4175SGAXUMA1? A10: BTS4175SGAXUMA1 is typically available in a surface-mount package such as PowerSSO-12.