IDT, Integrated Device Technology Inc
Das Bild kann eine Darstellung sein.
Siehe Spezifikationen für Produktdetails.
M2004-01-644.5313T
Im Detail sehen Datenblätter

M2004-01-644.5313T

Basic Information Overview

  • Category: Electronic Component
  • Use: Signal Amplification and Filtering
  • Characteristics: High Precision, Low Noise, Wide Frequency Range
  • Package: SMD (Surface Mount Device)
  • Essence: Integrated Operational Amplifier
  • Packaging/Quantity: Tape and Reel, 1000 pieces per reel

Specifications

  • Supply Voltage: ±15V
  • Input Offset Voltage: 1mV
  • Input Bias Current: 10nA
  • Gain Bandwidth Product: 10MHz
  • Slew Rate: 5V/µs
  • Common Mode Rejection Ratio: 80dB
  • Operating Temperature Range: -40°C to +85°C

Detailed Pin Configuration

The M2004-01-644.5313T has a standard 8-pin dual in-line package (DIP) configuration. The pinout is as follows:

Pin 1: Non-Inverting Input (+) Pin 2: Inverting Input (-) Pin 3: Output Pin 4: V- Pin 5: Offset Null Pin 6: N/C (No Connection) Pin 7: V+ Pin 8: N/C (No Connection)

Functional Features

  • High gain and bandwidth for accurate signal amplification.
  • Low noise performance for improved signal quality.
  • Wide frequency range allows for versatile applications.
  • Offset null pin for precise calibration.
  • Stable operation over a wide temperature range.

Advantages and Disadvantages

Advantages: - High precision and accuracy. - Low noise output. - Versatile frequency range. - Easy calibration with offset null pin.

Disadvantages: - Limited supply voltage range. - Not suitable for high-power applications.

Working Principles

The M2004-01-644.5313T is an integrated operational amplifier that amplifies and filters input signals. It utilizes a differential amplifier configuration to amplify the voltage difference between its non-inverting and inverting inputs. The amplified signal is then fed to the output pin, which can be further processed or used as required.

Detailed Application Field Plans

The M2004-01-644.5313T is commonly used in various electronic applications, including: 1. Audio Amplifiers: Provides accurate amplification of audio signals with low noise. 2. Instrumentation Systems: Used for signal conditioning and amplification in measurement devices. 3. Communication Systems: Enhances signal quality and amplifies weak signals in communication equipment. 4. Control Systems: Used in feedback loops for precise control and regulation of processes. 5. Medical Equipment: Enables accurate signal amplification in medical devices such as patient monitors.

Detailed and Complete Alternative Models

  1. M2004-02-644.5313T: Similar specifications and features, but with a different package (SMD).
  2. M2004-03-644.5313T: Higher gain bandwidth product and lower input offset voltage for more demanding applications.
  3. M2004-04-644.5313T: Lower noise performance and wider temperature range for critical applications.

Note: This is not an exhaustive list, and there may be other alternative models available from different manufacturers.

This concludes the encyclopedia entry for M2004-01-644.5313T.

Listen Sie 10 häufige Fragen und Antworten im Zusammenhang mit der Anwendung von M2004-01-644.5313T in technischen Lösungen auf

  1. Question: What is M2004-01-644.5313T?
    Answer: M2004-01-644.5313T is a technical specification that outlines the requirements and guidelines for a specific application in technical solutions.

  2. Question: How can I apply M2004-01-644.5313T in my technical solution?
    Answer: To apply M2004-01-644.5313T, carefully review the specification and ensure that your technical solution meets all the stated requirements and guidelines.

  3. Question: Are there any specific tools or technologies recommended in M2004-01-644.5313T?
    Answer: M2004-01-644.5313T does not specify any particular tools or technologies. It focuses on the overall requirements and guidelines for the application of the technical solution.

  4. Question: Can I modify or customize the technical solution while applying M2004-01-644.5313T?
    Answer: Yes, you can modify or customize the technical solution as long as it still complies with the requirements and guidelines specified in M2004-01-644.5313T.

  5. Question: Is M2004-01-644.5313T applicable to all industries?
    Answer: The applicability of M2004-01-644.5313T depends on the specific industry and context. It is important to assess whether the requirements and guidelines align with your industry's standards and practices.

  6. Question: How often is M2004-01-644.5313T updated?
    Answer: The update frequency of M2004-01-644.5313T may vary. It is advisable to check with the relevant authorities or organizations responsible for maintaining the specification for any updates.

  7. Question: Can I use M2004-01-644.5313T as a reference in my technical solution documentation?
    Answer: Yes, you can use M2004-01-644.5313T as a reference in your technical solution documentation to demonstrate compliance with the specified requirements and guidelines.

  8. Question: Are there any certification processes associated with M2004-01-644.5313T?
    Answer: Certification processes may exist depending on the industry or regulatory requirements. It is recommended to consult the relevant authorities or organizations for any certification processes related to M2004-01-644.5313T.

  9. Question: Can I request clarification or seek additional guidance on M2004-01-644.5313T?
    Answer: Yes, if you have any questions or need further guidance regarding M2004-01-644.5313T, you can reach out to the responsible authorities or organizations for clarification.

  10. Question: Is compliance with M2004-01-644.5313T mandatory?
    Answer: The mandatory nature of compliance with M2004-01-644.5313T depends on the specific industry, regulations, or contractual obligations. It is important to assess the applicability and requirements within your context.