IDT, Integrated Device Technology Inc
Das Bild kann eine Darstellung sein.
Siehe Spezifikationen für Produktdetails.
74FCT16373CTPAG8
Im Detail sehen Datenblätter

Encyclopedia Entry: 74FCT16373CTPAG8

Product Overview

Category

The 74FCT16373CTPAG8 belongs to the category of integrated circuits (ICs) and specifically falls under the family of flip-flops.

Use

This product is primarily used for storing and transferring digital data in electronic systems. It serves as a latch or register, allowing the storage and retrieval of binary information.

Characteristics

  • The 74FCT16373CTPAG8 is a 16-bit transparent D-type latch with 3-state outputs.
  • It operates on a wide voltage range, typically between 4.5V and 5.5V.
  • This IC offers high-speed performance, making it suitable for applications requiring quick data transfer.
  • It features a tri-state output, enabling multiple devices to share a common bus without interference.

Package and Quantity

The 74FCT16373CTPAG8 is available in a 48-pin Thin Shrink Small Outline Package (TSSOP). Each package contains one unit of the IC.

Essence

The essence of the 74FCT16373CTPAG8 lies in its ability to store and transmit digital data reliably and efficiently within electronic systems.

Specifications

  • Number of Bits: 16
  • Logic Family: FCT
  • Logic Type: D-Type Transparent Latch
  • Output Type: Tri-State
  • Voltage Range: 4.5V - 5.5V
  • Package Type: TSSOP
  • Pin Count: 48

Detailed Pin Configuration

The 74FCT16373CTPAG8 has a total of 48 pins, each serving a specific function. Here is a detailed pin configuration:

  1. OE (Output Enable) 1
  2. Q0 (Output) 1
  3. D0 (Data) 1
  4. D1 (Data) 2
  5. Q1 (Output) 2
  6. GND (Ground)
  7. D2 (Data) 3
  8. Q2 (Output) 3
  9. D3 (Data) 4
  10. Q3 (Output) 4
  11. VCC (Power Supply)
  12. D4 (Data) 5
  13. Q4 (Output) 5
  14. D5 (Data) 6
  15. Q5 (Output) 6
  16. D6 (Data) 7
  17. Q6 (Output) 7
  18. D7 (Data) 8
  19. Q7 (Output) 8
  20. GND (Ground)
  21. D8 (Data) 9
  22. Q8 (Output) 9
  23. D9 (Data) 10
  24. Q9 (Output) 10
  25. D10 (Data) 11
  26. Q10 (Output) 11
  27. D11 (Data) 12
  28. Q11 (Output) 12
  29. VCC (Power Supply)
  30. D12 (Data) 13
  31. Q12 (Output) 13
  32. D13 (Data) 14
  33. Q13 (Output) 14
  34. D14 (Data) 15
  35. Q14 (Output) 15
  36. D15 (Data) 16
  37. Q15 (Output) 16
  38. GND (Ground)
  39. LE (Latch Enable)
  40. CLK (Clock)
  41. OE (Output Enable) 2
  42. Q0 (Output) 17
  43. D0 (Data) 17
  44. D1 (Data) 18
  45. Q1 (Output) 18
  46. GND (Ground)
  47. D2 (Data) 19
  48. Q2 (Output) 19

Functional Features

  • Transparent latch design allows data to be stored and transferred while the clock signal is active.
  • Tri-state outputs enable multiple devices to share a common bus, reducing conflicts and improving system efficiency.
  • High-speed operation ensures rapid data transfer within electronic systems.
  • The latch enable (LE) signal controls the storage of data, providing flexibility in timing.

Advantages and Disadvantages

Advantages

  • High-speed performance enables efficient data transfer.
  • Tri-state outputs facilitate bus sharing and reduce conflicts.
  • Wide voltage range compatibility enhances versatility.
  • Transparent latch design allows for real-time data updates.

Disadvantages

  • Limited to 16-bit data storage and transfer.
  • Requires proper synchronization with clock signals for accurate operation.
  • Higher power consumption compared to some alternative models.

Working Principles

The 74FCT16373CTPAG8 operates based on the principles of digital

Listen Sie 10 häufige Fragen und Antworten im Zusammenhang mit der Anwendung von 74FCT16373CTPAG8 in technischen Lösungen auf

Sure! Here are 10 common questions and answers related to the application of 74FCT16373CTPAG8 in technical solutions:

  1. Q: What is the 74FCT16373CTPAG8? A: The 74FCT16373CTPAG8 is a 16-bit transparent latch with 3-state outputs, commonly used in digital circuits.

  2. Q: What is the purpose of a transparent latch? A: A transparent latch allows data to pass through when its enable input is active, providing a way to store and transfer data in digital systems.

  3. Q: How many bits can the 74FCT16373CTPAG8 handle? A: The 74FCT16373CTPAG8 can handle 16 bits of data.

  4. Q: What does "3-state outputs" mean? A: 3-state outputs allow the output pins to be in one of three states: high, low, or high-impedance (disconnected), which enables multiple devices to share a bus.

  5. Q: What voltage levels does the 74FCT16373CTPAG8 support? A: The 74FCT16373CTPAG8 supports a wide range of voltage levels, typically from 2V to 5.5V.

  6. Q: Can I use the 74FCT16373CTPAG8 in both synchronous and asynchronous applications? A: Yes, the 74FCT16373CTPAG8 can be used in both synchronous and asynchronous applications.

  7. Q: How do I connect the enable pin of the 74FCT16373CTPAG8? A: The enable pin should be connected to the control signal that determines whether the latch is transparent or latched.

  8. Q: Can I cascade multiple 74FCT16373CTPAG8 devices together? A: Yes, you can cascade multiple 74FCT16373CTPAG8 devices to increase the number of bits in your system.

  9. Q: What is the maximum operating frequency of the 74FCT16373CTPAG8? A: The maximum operating frequency of the 74FCT16373CTPAG8 depends on various factors but is typically in the range of tens to hundreds of megahertz.

  10. Q: Are there any specific precautions I should take when using the 74FCT16373CTPAG8? A: It is important to follow the recommended operating conditions and guidelines provided in the datasheet to ensure proper functionality and reliability of the device.