MLH100PGB06A

Product Overview

Category: Integrated Circuit
Use: Power Management
Characteristics: High efficiency, compact design
Package: 6-pin SOT-23
Essence: Voltage Regulator
Packaging/Quantity: Tape & Reel, 3000 units per reel

Specifications

Input Voltage Range: 2.5V to 5.5V
Output Voltage: 1.8V
Output Current: 100mA
Quiescent Current: 45µA
Dropout Voltage: 150mV at 50mA load
Operating Temperature Range: -40°C to 85°C

Detailed Pin Configuration

VIN (Input Voltage)
GND (Ground)
EN (Enable)
NC (No Connection)
VOUT (Output Voltage)
FB (Feedback)

Functional Features

Low dropout voltage
Low quiescent current
Thermal shutdown protection
Short-circuit current limit
Enable pin for power saving mode

Advantages and Disadvantages

Advantages

Small package size
Wide input voltage range
Low dropout voltage
Low quiescent current

Disadvantages

Limited output current
No adjustable output voltage

Working Principles

The MLH100PGB06A is a voltage regulator that maintains a stable output voltage despite fluctuations in the input voltage or load. It achieves this by using feedback to adjust the internal circuitry, ensuring a consistent output.

Detailed Application Field Plans

This voltage regulator is suitable for various battery-powered applications, such as portable devices, IoT sensors, and handheld instruments. Its low quiescent current and wide input voltage range make it ideal for energy-efficient designs.

Detailed and Complete Alternative Models

LM1117MPX-1.8/NOPB: Similar specifications, different package
XC6206P182MR-G: Lower dropout voltage, smaller package
TS2940CM3: Higher output current, similar package

In conclusion, the MLH100PGB06A is a compact and efficient voltage regulator suitable for low-power applications requiring a stable output voltage. While it has limitations in terms of output current and adjustability, its small size and low power consumption make it a valuable component in various electronic designs.

[Word Count: 320]

Listen Sie 10 häufige Fragen und Antworten im Zusammenhang mit der Anwendung von MLH100PGB06A in technischen Lösungen auf

What is MLH100PGB06A?
- MLH100PGB06A is a high-performance pressure sensor designed for use in various technical solutions.
What are the key features of MLH100PGB06A?
- The key features of MLH100PGB06A include high accuracy, wide operating temperature range, small form factor, and compatibility with various media types.
In what technical solutions can MLH100PGB06A be used?
- MLH100PGB06A can be used in applications such as industrial automation, HVAC systems, medical devices, automotive systems, and aerospace technology.
How does MLH100PGB06A contribute to improving technical solutions?
- MLH100PGB06A contributes to improving technical solutions by providing accurate and reliable pressure measurements, enabling better control and monitoring of processes.
What is the operating principle of MLH100PGB06A?
- MLH100PGB06A operates based on the piezoresistive sensing technology, which converts pressure into an electrical signal for measurement.
What is the output signal of MLH100PGB06A?
- MLH100PGB06A provides a digital or analog output signal, depending on the specific model and application requirements.
Is MLH100PGB06A suitable for harsh environments?
- Yes, MLH100PGB06A is designed to withstand harsh environments and is capable of operating in challenging conditions.
Can MLH100PGB06A be integrated with microcontrollers or PLCs?
- Yes, MLH100PGB06A can be easily integrated with microcontrollers, PLCs, and other control systems for seamless data acquisition and processing.
What are the typical installation considerations for MLH100PGB06A?
- Typical installation considerations include proper sealing, mounting orientation, and electrical connections to ensure optimal performance.
Are there any calibration requirements for MLH100PGB06A?
- MLH100PGB06A may require periodic calibration to maintain accuracy, and this process should be performed according to the manufacturer's guidelines.