Honeywell Sensing and Productivity Solutions
Das Bild kann eine Darstellung sein.
Siehe Spezifikationen für Produktdetails.
HIH-4010-002
Im Detail sehen Datenblätter

HIH-4010-002: Product Overview and Specifications

Introduction

The HIH-4010-002 is a humidity sensor designed for use in various applications. This entry provides an overview of the product, including its category, use, characteristics, packaging, specifications, pin configuration, functional features, advantages, disadvantages, working principles, application field plans, and alternative models.

Basic Information Overview

  • Category: Humidity Sensor
  • Use: Measurement of relative humidity in various environments
  • Characteristics: High accuracy, low power consumption, digital output
  • Package: Surface-mount device (SMD)
  • Essence: Accurate and reliable humidity sensing
  • Packaging/Quantity: Typically available in reels of 1000 units

Specifications

  • Operating Voltage: 2.7V to 5.5V
  • Humidity Range: 0% to 100%
  • Accuracy: ±2% relative humidity
  • Output Type: I2C digital output
  • Operating Temperature Range: -40°C to 85°C
  • Storage Temperature Range: -40°C to 125°C

Detailed Pin Configuration

The HIH-4010-002 sensor has a standard pin configuration as follows: 1. VDD (Power supply) 2. GND (Ground) 3. SDA (I2C data line) 4. SCL (I2C clock line)

Functional Features

  • Digital output for easy interfacing with microcontrollers
  • Low power consumption for battery-operated applications
  • High accuracy for precise humidity measurement
  • Wide operating temperature range for versatile use

Advantages and Disadvantages

Advantages

  • High accuracy
  • Low power consumption
  • Digital output for easy integration
  • Wide operating temperature range

Disadvantages

  • Relatively higher cost compared to some analog sensors
  • Limited customization options for specific applications

Working Principles

The HIH-4010-002 utilizes a capacitive sensing element to measure relative humidity. Changes in humidity cause the capacitance of the sensing element to vary, which is then converted into a digital output signal using internal circuitry.

Detailed Application Field Plans

The HIH-4010-002 sensor finds applications in various fields, including: - HVAC systems - Weather stations - Industrial process control - Medical devices - Automotive climate control

Detailed and Complete Alternative Models

  • HIH-4030: Similar performance with a different package type
  • SHT31: Comparable accuracy and digital output interface
  • DHT22: Lower cost alternative with slightly reduced accuracy

In conclusion, the HIH-4010-002 humidity sensor offers high accuracy, low power consumption, and digital output, making it suitable for diverse applications requiring precise humidity measurement.

Word count: 398

Listen Sie 10 häufige Fragen und Antworten im Zusammenhang mit der Anwendung von HIH-4010-002 in technischen Lösungen auf

  1. What is HIH-4010-002?

    • HIH-4010-002 is a humidity sensor designed for use in various technical solutions to measure relative humidity.

  2. How does HIH-4010-002 work?

    • The sensor uses a capacitive polymer film to measure changes in capacitance as the relative humidity of the surrounding air changes.

  3. What is the operating voltage range of HIH-4010-002?

    • The operating voltage range is typically 4-5.8V DC.

  4. What is the accuracy of HIH-4010-002?

    • The accuracy of the sensor is typically within ±3% relative humidity.

  5. Can HIH-4010-002 be used in outdoor applications?

    • Yes, it can be used in outdoor applications, but it should be protected from direct exposure to water and extreme environmental conditions.

  6. What is the response time of HIH-4010-002?

    • The response time is typically less than 10 seconds.

  7. Is calibration required for HIH-4010-002?

    • The sensor comes factory-calibrated, but periodic recalibration may be necessary depending on the application and environmental conditions.

  8. What is the temperature range for operation of HIH-4010-002?

    • The sensor can typically operate within a temperature range of -40°C to 85°C.

  9. Can HIH-4010-002 be integrated with microcontrollers?

    • Yes, it can be easily integrated with microcontrollers using analog or digital interfaces.

  10. Are there any special considerations for mounting HIH-4010-002?

    • It is important to mount the sensor in a location that accurately represents the ambient conditions and to avoid exposure to contaminants or direct airflow.

I hope this information is helpful! Let me know if you need further assistance.