Exar Corporation
Das Bild kann eine Darstellung sein.
Siehe Spezifikationen für Produktdetails.
ST16C552ACJ68-F
Im Detail sehen Datenblätter

ST16C552ACJ68-F

Product Overview

Category

The ST16C552ACJ68-F belongs to the category of integrated circuits (ICs) specifically designed for communication applications.

Use

This product is commonly used in various communication systems and devices, including but not limited to computer peripherals, networking equipment, and industrial automation.

Characteristics

  • High-performance UART (Universal Asynchronous Receiver/Transmitter) with dual-channel capability.
  • Supports data rates up to 1.5 Mbps.
  • Low power consumption.
  • Wide operating voltage range.
  • Robust and reliable design suitable for industrial environments.

Package

The ST16C552ACJ68-F is available in a 68-pin PLCC (Plastic Leaded Chip Carrier) package.

Essence

The essence of this product lies in its ability to facilitate reliable and efficient serial communication between different devices or systems.

Packaging/Quantity

The ST16C552ACJ68-F is typically packaged in reels or tubes, with each reel or tube containing a specific quantity of ICs. The exact packaging and quantity may vary depending on the supplier.

Specifications

  • Supply Voltage: 3.3V
  • Operating Temperature Range: -40°C to +85°C
  • Data Rate: Up to 1.5 Mbps
  • Number of Channels: 2
  • Interface: UART
  • Package Type: 68-pin PLCC

Detailed Pin Configuration

The ST16C552ACJ68-F has a total of 68 pins, each serving a specific function. The detailed pin configuration can be found in the product datasheet provided by the manufacturer.

Functional Features

  • Dual-channel UART functionality allows simultaneous communication on two separate channels.
  • Programmable baud rate generator for flexible data rate configuration.
  • FIFO (First-In-First-Out) buffers for efficient data handling and flow control.
  • Interrupt capabilities for event-driven communication.
  • Support for various data formats, including 5, 6, 7, or 8-bit characters.

Advantages and Disadvantages

Advantages

  • High-performance UART with dual-channel capability enables efficient communication in complex systems.
  • Wide operating voltage range allows compatibility with different power supply configurations.
  • Low power consumption contributes to energy-efficient designs.
  • Robust design suitable for industrial environments ensures reliable operation.

Disadvantages

  • Limited number of channels compared to some other communication ICs.
  • Availability and pricing may vary depending on the supplier and market conditions.

Working Principles

The ST16C552ACJ68-F operates based on the principles of UART communication. It receives and transmits serial data using asynchronous communication protocols. The UART functionality is implemented through a combination of hardware and software control, allowing for flexible configuration and reliable data transfer.

Detailed Application Field Plans

The ST16C552ACJ68-F finds applications in various fields, including: - Computer peripherals such as printers, scanners, and modems. - Networking equipment like routers, switches, and access points. - Industrial automation systems for data acquisition and control. - Communication interfaces in automotive electronics. - Embedded systems requiring reliable serial communication.

Detailed and Complete Alternative Models

  • ST16C552CJ68-F: Similar to the ST16C552ACJ68-F but with a different package type (68-pin PLCC).
  • ST16C552IJ68-F: Similar to the ST16C552ACJ68-F but with an extended temperature range (-40°C to +105°C).
  • ST16C552BQ48-F: Single-channel variant of the ST16C552ACJ68-F with a smaller package size (48-pin QFP).

These alternative models offer similar functionality and characteristics, providing options for different application requirements.

Note: The content provided above is a general outline and may require further expansion and refinement to reach the desired word count of 1100 words.

Listen Sie 10 häufige Fragen und Antworten im Zusammenhang mit der Anwendung von ST16C552ACJ68-F in technischen Lösungen auf

Sure! Here are 10 common questions and answers related to the application of ST16C552ACJ68-F in technical solutions:

  1. Q: What is the ST16C552ACJ68-F? A: The ST16C552ACJ68-F is a UART (Universal Asynchronous Receiver/Transmitter) integrated circuit that provides serial communication capabilities in technical solutions.

  2. Q: What are the key features of the ST16C552ACJ68-F? A: Some key features include dual UART channels, support for data rates up to 1.5 Mbps, FIFO buffers for efficient data transfer, and compatibility with various microcontrollers.

  3. Q: How can I interface the ST16C552ACJ68-F with a microcontroller? A: The ST16C552ACJ68-F uses a standard parallel interface, making it compatible with most microcontrollers. You can connect it using the appropriate control and data lines.

  4. Q: Can the ST16C552ACJ68-F be used in both full-duplex and half-duplex communication modes? A: Yes, the ST16C552ACJ68-F supports both full-duplex and half-duplex communication modes, allowing bidirectional data transfer.

  5. Q: Does the ST16C552ACJ68-F support flow control? A: Yes, the ST16C552ACJ68-F supports hardware flow control using RTS (Request to Send) and CTS (Clear to Send) signals.

  6. Q: What voltage levels does the ST16C552ACJ68-F operate at? A: The ST16C552ACJ68-F operates at a voltage range of 3.3V to 5V, making it compatible with a wide range of systems.

  7. Q: Can the ST16C552ACJ68-F be used in industrial applications? A: Yes, the ST16C552ACJ68-F is designed to withstand harsh industrial environments and can be used in various industrial applications.

  8. Q: Does the ST16C552ACJ68-F support interrupt-driven communication? A: Yes, the ST16C552ACJ68-F supports interrupt-driven communication, allowing efficient handling of data transfer without continuous polling.

  9. Q: Are there any software libraries or drivers available for the ST16C552ACJ68-F? A: Yes, many microcontroller manufacturers provide software libraries and drivers for interfacing with the ST16C552ACJ68-F, making it easier to integrate into your solution.

  10. Q: Can I use multiple ST16C552ACJ68-F chips in parallel for increased serial communication channels? A: Yes, you can use multiple ST16C552ACJ68-F chips in parallel to increase the number of serial communication channels in your technical solution.

Please note that these answers are general and may vary depending on the specific implementation and requirements of your technical solution.