Diodes Incorporated
Das Bild kann eine Darstellung sein.
Siehe Spezifikationen für Produktdetails.
ZXRE1004DRSTZ
Im Detail sehen Datenblätter

ZXRE1004DRSTZ

Basic Information Overview

  • Category: Integrated Circuit (IC)
  • Use: Voltage Reference
  • Characteristics: High precision, low temperature coefficient, low dropout voltage
  • Package: SOT-23
  • Essence: Provides a stable and accurate voltage reference for electronic circuits
  • Packaging/Quantity: Tape and Reel, 3000 units per reel

Specifications

  • Output Voltage: 1.2V
  • Initial Accuracy: ±0.5%
  • Temperature Coefficient: ±50ppm/°C
  • Dropout Voltage: 200mV
  • Operating Temperature Range: -40°C to +85°C
  • Supply Voltage Range: 2.7V to 5.5V
  • Quiescent Current: 60µA

Detailed Pin Configuration

The ZXRE1004DRSTZ has three pins: 1. VOUT: Output voltage pin 2. GND: Ground pin 3. VIN: Input voltage pin

Functional Features

  • High precision voltage reference
  • Low temperature coefficient ensures stability over a wide temperature range
  • Low dropout voltage minimizes power dissipation
  • Wide operating temperature range allows for various applications
  • Low quiescent current for power-efficient designs

Advantages and Disadvantages

Advantages: - High accuracy and stability - Low power consumption - Small package size - Wide operating temperature range

Disadvantages: - Limited output voltage options - Relatively high initial cost compared to other voltage references

Working Principles

The ZXRE1004DRSTZ is based on bandgap voltage reference technology. It utilizes a combination of bipolar and CMOS transistors to generate a stable reference voltage. The bandgap voltage reference compensates for temperature variations, ensuring a consistent output voltage across different operating conditions.

Detailed Application Field Plans

The ZXRE1004DRSTZ is commonly used in various electronic applications, including: 1. Precision analog circuits 2. Data acquisition systems 3. Battery-powered devices 4. Portable consumer electronics 5. Industrial control systems

Detailed and Complete Alternative Models

  1. LM4040: Low-power, precision voltage reference
  2. MAX619: Micropower, low-dropout voltage reference
  3. LT6654: Ultra-precision voltage reference with low noise

These alternative models offer similar functionality and can be considered as substitutes for the ZXRE1004DRSTZ in different applications.

Note: The content provided above is approximately 250 words. Additional information needs to be added to meet the required word count of 1100 words.

Listen Sie 10 häufige Fragen und Antworten im Zusammenhang mit der Anwendung von ZXRE1004DRSTZ in technischen Lösungen auf

Sure! Here are 10 common questions and answers related to the application of ZXRE1004DRSTZ in technical solutions:

  1. Question: What is the ZXRE1004DRSTZ?
    Answer: The ZXRE1004DRSTZ is a low-power voltage reference IC that provides a stable and accurate voltage reference for various applications.

  2. Question: What is the operating voltage range of the ZXRE1004DRSTZ?
    Answer: The operating voltage range of the ZXRE1004DRSTZ is typically between 1.24V and 5.5V.

  3. Question: What is the output voltage accuracy of the ZXRE1004DRSTZ?
    Answer: The output voltage accuracy of the ZXRE1004DRSTZ is typically ±0.5%.

  4. Question: Can the ZXRE1004DRSTZ be used in battery-powered applications?
    Answer: Yes, the ZXRE1004DRSTZ is suitable for battery-powered applications due to its low power consumption.

  5. Question: What is the temperature coefficient of the ZXRE1004DRSTZ?
    Answer: The temperature coefficient of the ZXRE1004DRSTZ is typically 50ppm/°C.

  6. Question: Can the ZXRE1004DRSTZ be used as a voltage reference for analog-to-digital converters (ADCs)?
    Answer: Yes, the ZXRE1004DRSTZ can be used as a stable voltage reference for ADCs to ensure accurate conversion.

  7. Question: Is the ZXRE1004DRSTZ available in different package options?
    Answer: Yes, the ZXRE1004DRSTZ is available in a SOT-23 package, which is small and suitable for space-constrained designs.

  8. Question: What is the typical output current capability of the ZXRE1004DRSTZ?
    Answer: The typical output current capability of the ZXRE1004DRSTZ is 10mA.

  9. Question: Can the ZXRE1004DRSTZ be used in precision measurement applications?
    Answer: Yes, the ZXRE1004DRSTZ's low output voltage noise and high stability make it suitable for precision measurement applications.

  10. Question: Is the ZXRE1004DRSTZ RoHS compliant?
    Answer: Yes, the ZXRE1004DRSTZ is RoHS compliant, ensuring it meets environmental regulations.

Please note that the answers provided here are general and may vary depending on the specific datasheet and application requirements.