The PI74AVC164245LAAEX has a total of 48 pins. The pin configuration is as follows:
Advantages: - Provides seamless translation between different voltage levels - Non-inverting translation preserves signal integrity - High-speed data transmission capability - Flexible supply voltage range for compatibility with different systems
Disadvantages: - Limited to 16-bit translation, may not be suitable for larger data buses - Requires careful consideration of power supply requirements
The PI74AVC164245LAAEX is a bidirectional voltage level translator that enables seamless communication between two different voltage domains in electronic circuits. It utilizes a combination of MOSFETs and CMOS technology to achieve non-inverting translation while maintaining the logic state of the input signals.
The device operates by monitoring the input voltage levels and translating them to the corresponding output voltage levels. The direction of translation is determined by the logic levels applied to the OE\ (Output Enable) pins. When the OE\ pin is low, the
Sure! Here are 10 common questions and answers related to the application of PI74AVC164245LAAEX in technical solutions:
Q: What is PI74AVC164245LAAEX? A: PI74AVC164245LAAEX is a 16-bit bidirectional voltage level translator with 3-state outputs.
Q: What is the voltage range supported by PI74AVC164245LAAEX? A: PI74AVC164245LAAEX supports voltage translation from 1.2V to 3.6V on the A port and 1.65V to 5.5V on the B port.
Q: How many channels does PI74AVC164245LAAEX have? A: PI74AVC164245LAAEX has 16 channels, allowing bidirectional voltage translation for up to 16 signals.
Q: Can PI74AVC164245LAAEX be used for level shifting between different logic families? A: Yes, PI74AVC164245LAAEX can be used for level shifting between various logic families, such as TTL, CMOS, and LVCMOS.
Q: What is the maximum data rate supported by PI74AVC164245LAAEX? A: PI74AVC164245LAAEX supports data rates up to 200 Mbps, making it suitable for high-speed applications.
Q: Does PI74AVC164245LAAEX have built-in ESD protection? A: Yes, PI74AVC164245LAAEX features built-in ESD protection, ensuring robustness against electrostatic discharge events.
Q: Can PI74AVC164245LAAEX be used in both push-pull and open-drain configurations? A: Yes, PI74AVC164245LAAEX supports both push-pull and open-drain output configurations, providing flexibility in system design.
Q: Is PI74AVC164245LAAEX compatible with hot-swapping applications? A: Yes, PI74AVC164245LAAEX is designed to support hot-swapping, allowing for safe insertion and removal of devices during operation.
Q: What is the power supply voltage range for PI74AVC164245LAAEX? A: PI74AVC164245LAAEX operates with a power supply voltage range of 1.2V to 3.6V.
Q: Can PI74AVC164245LAAEX be used in automotive applications? A: Yes, PI74AVC164245LAAEX is qualified for automotive applications and meets the necessary standards and requirements.
Please note that these answers are general and may vary depending on the specific datasheet and application requirements.