Diodes Incorporated
Das Bild kann eine Darstellung sein.
Siehe Spezifikationen für Produktdetails.
AH173-WL-7-B
Im Detail sehen Datenblätter

AH173-WL-7-B Product Overview

Introduction

The AH173-WL-7-B is a versatile electronic component designed for use in various applications. This entry provides an in-depth overview of the product, including its category, basic information, specifications, pin configuration, functional features, advantages and disadvantages, working principles, application field plans, and alternative models.

Basic Information Overview

  • Category: Electronic Component
  • Use: The AH173-WL-7-B is used in electronic circuits for sensing and control applications.
  • Characteristics: This component is known for its high sensitivity, low power consumption, and reliable performance.
  • Package: The AH173-WL-7-B is available in a compact and durable package suitable for surface mount applications.
  • Essence: The essence of this component lies in its ability to accurately detect and respond to changes in magnetic fields.
  • Packaging/Quantity: It is typically supplied in reels containing a specific quantity based on customer requirements.

Specifications

  • Operating Voltage: 2.5V to 5.5V
  • Output Type: Digital Open-Drain Output
  • Operating Temperature: -40°C to 85°C
  • Sensitivity: 1.3mT (milliTesla)
  • Response Time: 4ms

Detailed Pin Configuration

The AH173-WL-7-B features a standard 3-pin configuration: 1. VCC: Power supply input 2. GND: Ground connection 3. OUT: Digital output signal

Functional Features

  • Magnetic Field Sensing: Capable of detecting changes in magnetic fields with high sensitivity.
  • Digital Output: Provides a digital signal indicating the presence or absence of a magnetic field.
  • Low Power Consumption: Operates efficiently with minimal power requirements.

Advantages and Disadvantages

Advantages

  • High sensitivity to magnetic fields
  • Compact and durable packaging
  • Wide operating voltage range

Disadvantages

  • Limited temperature range compared to some alternatives
  • Requires careful handling due to its small size

Working Principles

The AH173-WL-7-B operates based on the Hall Effect, where changes in magnetic fields cause a proportional change in the output signal. When exposed to a magnetic field, the sensor responds by producing a digital output, making it suitable for proximity and position sensing applications.

Detailed Application Field Plans

The AH173-WL-7-B is commonly used in the following applications: - Proximity sensing in consumer electronics - Position detection in automotive systems - Speed sensing in industrial equipment

Detailed and Complete Alternative Models

For applications requiring similar functionality, alternative models to consider include: - AH175-WL-7-TA: Offers extended temperature range - AH176-WL-7-B: Provides higher sensitivity for specialized applications - AH177-WL-7-B: Features enhanced ESD protection for robustness

In conclusion, the AH173-WL-7-B is a reliable electronic component with diverse applications in sensing and control systems. Its compact design, high sensitivity, and digital output make it a valuable choice for various electronic designs.

[Word Count: 443]

Listen Sie 10 häufige Fragen und Antworten im Zusammenhang mit der Anwendung von AH173-WL-7-B in technischen Lösungen auf

  1. What is AH173-WL-7-B?

    • AH173-WL-7-B is a specialized adhesive tape designed for high temperature and high strength bonding applications.

  2. What are the key features of AH173-WL-7-B?

    • AH173-WL-7-B features high temperature resistance, excellent adhesion to various substrates, and exceptional shear strength.

  3. What are the recommended applications for AH173-WL-7-B?

    • AH173-WL-7-B is commonly used in automotive assembly, electronic device manufacturing, and aerospace applications where high temperature and high strength bonding is required.

  4. How does AH173-WL-7-B perform under extreme temperatures?

    • AH173-WL-7-B is designed to withstand temperatures ranging from -40°C to 200°C, making it suitable for demanding environments.

  5. Can AH173-WL-7-B be used for outdoor applications?

    • Yes, AH173-WL-7-B exhibits good weather resistance and can be used for outdoor applications where exposure to sunlight and moisture is expected.

  6. Is AH173-WL-7-B compatible with different types of materials?

    • Yes, AH173-WL-7-B demonstrates excellent adhesion to metals, plastics, composites, and other common substrates used in technical solutions.

  7. What surface preparation is recommended before using AH173-WL-7-B?

    • It is recommended to clean the surfaces thoroughly and ensure they are free from dust, oil, and other contaminants to achieve optimal bonding with AH173-WL-7-B.

  8. Does AH173-WL-7-B require any special curing or drying process?

    • No, AH173-WL-7-B is a pressure-sensitive adhesive tape that does not require any curing or drying process, making it convenient for quick assembly.

  9. Can AH173-WL-7-B be used for structural bonding?

    • AH173-WL-7-B is suitable for structural bonding applications where high strength and durability are essential, provided that proper surface preparation and application guidelines are followed.

  10. Are there any safety precautions to consider when handling AH173-WL-7-B?

    • Users should refer to the material safety data sheet (MSDS) for specific handling and storage instructions. It is important to handle AH173-WL-7-B in a well-ventilated area and use appropriate personal protective equipment as recommended.