Bourns Inc.
Das Bild kann eine Darstellung sein.
Siehe Spezifikationen für Produktdetails.
BDX54-S
Im Detail sehen Datenblätter

BDX54-S Transistor

Product Overview

The BDX54-S transistor belongs to the category of power transistors and is commonly used in electronic circuits for amplification and switching applications. Its characteristics include high current capability, low saturation voltage, and a rugged design. The transistor is typically packaged in a TO-220 package and is available in various quantities.

Specifications

  • Maximum Collector-Emitter Voltage: 100V
  • Continuous Collector Current: 8A
  • Total Power Dissipation: 80W
  • DC Current Gain (hFE): 15 - 60
  • Package Type: TO-220
  • Quantity: Available in single or bulk packaging

Detailed Pin Configuration

The BDX54-S transistor has a standard TO-220 pin configuration with three pins: 1. Base (B) 2. Emitter (E) 3. Collector (C)

Functional Features

  • High current capability
  • Low saturation voltage
  • Rugged design for reliable performance

Advantages and Disadvantages

Advantages

  • High current handling capability
  • Low voltage drop during operation
  • Durable and rugged construction

Disadvantages

  • Relatively low DC current gain compared to some alternative models
  • May require heat sinking in high-power applications

Working Principles

The BDX54-S transistor operates based on the principles of amplification and control of electrical currents. When a small current is applied to the base terminal, it controls a larger current flow between the collector and emitter terminals, allowing for signal amplification or switching functions within electronic circuits.

Detailed Application Field Plans

The BDX54-S transistor finds extensive use in the following application fields: - Audio amplifiers - Power supply circuits - Motor control systems - LED lighting drivers - Switching regulators

Detailed and Complete Alternative Models

Some alternative models to the BDX54-S transistor include: - TIP31C - MJ15003 - 2N3055 - MJE13005

In conclusion, the BDX54-S transistor is a versatile component with high current capability and low saturation voltage, making it suitable for a wide range of amplification and switching applications in electronic circuits.

[Word count: 271]

Listen Sie 10 häufige Fragen und Antworten im Zusammenhang mit der Anwendung von BDX54-S in technischen Lösungen auf

  1. What is the BDX54-S transistor used for?

    • The BDX54-S is a high power NPN transistor commonly used in audio amplifiers, power supplies, and motor control applications.

  2. What are the key specifications of the BDX54-S transistor?

    • The BDX54-S has a maximum collector current of 8A, a maximum collector-emitter voltage of 100V, and a power dissipation of 80W.

  3. Can the BDX54-S be used for switching applications?

    • Yes, the BDX54-S can be used for switching applications due to its high current and voltage ratings.

  4. How do I properly mount the BDX54-S transistor?

    • The BDX54-S should be mounted on a suitable heat sink to ensure proper thermal management and prevent overheating.

  5. What are the typical circuit configurations for using the BDX54-S in audio amplifiers?

    • The BDX54-S can be used in common emitter or emitter follower configurations for audio amplifier applications.

  6. Is the BDX54-S suitable for motor control applications?

    • Yes, the BDX54-S is well-suited for motor control applications due to its high current handling capability.

  7. What are the recommended operating conditions for the BDX54-S?

    • The BDX54-S operates best within a temperature range of -65°C to 150°C and requires a minimum base current of 20mA for proper saturation.

  8. Can the BDX54-S be used in high-power LED driver circuits?

    • Yes, the BDX54-S can be used in high-power LED driver circuits due to its high current handling capacity.

  9. What are the typical failure modes of the BDX54-S transistor?

    • Common failure modes include thermal runaway due to inadequate heat sinking and overvoltage breakdown if not properly protected.

  10. Are there any important considerations when designing a circuit with the BDX54-S?

    • It's important to consider proper heat dissipation, base drive requirements, and protection against overcurrent and overvoltage conditions when designing circuits with the BDX54-S.