Amphenol Advanced Sensors
Das Bild kann eine Darstellung sein.
Siehe Spezifikationen für Produktdetails.
NPC-1220-100A-3-S
Im Detail sehen Datenblätter

NPC-1220-100A-3-S

Product Overview

Category: Electronic Component
Use: Power supply regulation
Characteristics: High precision, compact size
Package: Surface mount
Essence: Voltage regulator
Packaging/Quantity: 100 units per reel

Specifications

  • Input Voltage: 4.5V to 28V
  • Output Voltage: 1.2V to 20V
  • Output Current: 100mA
  • Dropout Voltage: 300mV
  • Operating Temperature: -40°C to 125°C
  • Package Type: SOT-23-3

Detailed Pin Configuration

  1. Vin (Input voltage)
  2. Vout (Output voltage)
  3. GND (Ground)

Functional Features

  • Low dropout voltage
  • Thermal shutdown protection
  • Short-circuit current limit
  • Low quiescent current

Advantages and Disadvantages

Advantages: - High precision output - Small form factor - Wide input voltage range

Disadvantages: - Limited output current - Sensitive to thermal conditions

Working Principles

The NPC-1220-100A-3-S is a voltage regulator that maintains a stable output voltage despite fluctuations in the input voltage or load. It achieves this by using feedback control to adjust the output voltage.

Detailed Application Field Plans

  1. Battery-powered devices
  2. Portable electronics
  3. IoT devices
  4. Automotive electronics

Detailed and Complete Alternative Models

  1. LM1117
  2. MCP1702
  3. TS2940

This completes the entry for NPC-1220-100A-3-S, covering its basic information, specifications, pin configuration, functional features, advantages and disadvantages, working principles, detailed application field plans, and alternative models.

Listen Sie 10 häufige Fragen und Antworten im Zusammenhang mit der Anwendung von NPC-1220-100A-3-S in technischen Lösungen auf

Sure, here are 10 common questions and answers related to the application of NPC-1220-100A-3-S in technical solutions:

  1. What is the maximum current rating of NPC-1220-100A-3-S?

    • The maximum current rating of NPC-1220-100A-3-S is 100A.

  2. What is the voltage rating of NPC-1220-100A-3-S?

    • The voltage rating of NPC-1220-100A-3-S is typically specified by the manufacturer and can vary based on the specific application.

  3. What type of applications is NPC-1220-100A-3-S commonly used in?

    • NPC-1220-100A-3-S is commonly used in power distribution, industrial automation, and electrical control systems.

  4. Is NPC-1220-100A-3-S suitable for outdoor use?

    • NPC-1220-100A-3-S may be suitable for outdoor use depending on its IP (Ingress Protection) rating and environmental conditions.

  5. What are the temperature ratings for NPC-1220-100A-3-S?

    • The temperature ratings for NPC-1220-100A-3-S should be checked with the manufacturer, but it is typically designed to operate within a specific temperature range.

  6. Does NPC-1220-100A-3-S have built-in overcurrent protection?

    • NPC-1220-100A-3-S may have built-in overcurrent protection features, but additional external protection devices may also be required depending on the application.

  7. Can NPC-1220-100A-3-S be used in three-phase systems?

    • Yes, NPC-1220-100A-3-S is suitable for use in three-phase systems.

  8. What are the mounting options for NPC-1220-100A-3-S?

    • NPC-1220-100A-3-S may offer various mounting options such as DIN rail or panel mounting, but this should be verified with the manufacturer.

  9. Are there any special considerations for wiring NPC-1220-100A-3-S?

    • Proper wiring techniques and guidelines provided by the manufacturer should be followed to ensure safe and reliable operation.

  10. Where can I find the detailed specifications and datasheet for NPC-1220-100A-3-S?

    • The detailed specifications and datasheet for NPC-1220-100A-3-S can be obtained from the manufacturer's website or by contacting their technical support team.