Siehe Spezifikationen für Produktdetails.
ACS710KLATR-12CB-NL-T
Product Overview
Category
The ACS710KLATR-12CB-NL-T belongs to the category of integrated current sensor ICs.
Use
This product is used for accurately measuring current in various electronic systems and applications.
Characteristics
- High accuracy
- Low offset voltage
- Wide dynamic range
- Small form factor
Package
The ACS710KLATR-12CB-NL-T is available in a compact surface-mount package.
Essence
The essence of this product lies in its ability to provide precise current measurements in a convenient and efficient manner.
Packaging/Quantity
The ACS710KLATR-12CB-NL-T is typically packaged in reels and is available in varying quantities based on customer requirements.
Specifications
- Operating Voltage: 3.0V to 5.5V
- Current Sensing Range: ±12.5A
- Output Type: Analog Voltage
- Bandwidth: 80kHz
- Temperature Range: -40°C to 125°C
Detailed Pin Configuration
The detailed pin configuration of the ACS710KLATR-12CB-NL-T includes: 1. VCC 2. GND 3. VIOUT 4. VOUT 5. NC (No Connection)
Functional Features
- High sensitivity
- Low noise
- Overcurrent detection
- Integrated thermal protection
Advantages and Disadvantages
Advantages
- Accurate current measurement
- Wide operating temperature range
- Integrated protection features
Disadvantages
- Limited current sensing range compared to some other models
- Analog output may require additional signal conditioning
Working Principles
The ACS710KLATR-12CB-NL-T operates based on the Hall effect, where the magnetic field generated by the current flowing through the conductor is sensed and converted into an analog voltage output proportional to the current.
Detailed Application Field Plans
This product is well-suited for use in: - Motor control systems - Power supplies - Battery management systems - Industrial automation
Detailed and Complete Alternative Models
Some alternative models to the ACS710KLATR-12CB-NL-T include: - ACS712ELCTR-05B-T - ACS711KEXLT-15AB-T - ACS709KLATR-25CB-T
In conclusion, the ACS710KLATR-12CB-NL-T offers high accuracy and reliability in current sensing applications, making it a valuable component in various electronic systems.
[Word Count: 346]
Listen Sie 10 häufige Fragen und Antworten im Zusammenhang mit der Anwendung von ACS710KLATR-12CB-NL-T in technischen Lösungen auf
What is the ACS710KLATR-12CB-NL-T?
- The ACS710KLATR-12CB-NL-T is a high-performance, fully integrated Hall-effect-based linear current sensor IC with an integrated overcurrent detection feature.
What is the operating voltage range of the ACS710KLATR-12CB-NL-T?
- The operating voltage range of the ACS710KLATR-12CB-NL-T is 3.0V to 5.5V.
What is the typical output sensitivity of the ACS710KLATR-12CB-NL-T?
- The typical output sensitivity of the ACS710KLATR-12CB-NL-T is 60mV/A.
What is the maximum continuous current that the ACS710KLATR-12CB-NL-T can measure?
- The ACS710KLATR-12CB-NL-T can measure a maximum continuous current of ±12.5A.
What is the package type of the ACS710KLATR-12CB-NL-T?
- The ACS710KLATR-12CB-NL-T is available in a compact, surface-mount CB package.
Does the ACS710KLATR-12CB-NL-T have built-in overcurrent detection?
- Yes, the ACS710KLATR-12CB-NL-T has an integrated overcurrent detection feature.
What is the temperature range for the operation of ACS710KLATR-12CB-NL-T?
- The ACS710KLATR-12CB-NL-T operates within a temperature range of -40°C to 125°C.
Is the ACS710KLATR-12CB-NL-T suitable for automotive applications?
- Yes, the ACS710KLATR-12CB-NL-T is AEC-Q100 qualified and suitable for automotive applications.
What are the typical applications of the ACS710KLATR-12CB-NL-T?
- Typical applications include motor control, power management, and overcurrent protection in various technical solutions.
Does the ACS710KLATR-12CB-NL-T require external calibration?
- No, the ACS710KLATR-12CB-NL-T is factory calibrated and does not require external calibration.