ABLIC U.S.A. Inc.
Das Bild kann eine Darstellung sein.
Siehe Spezifikationen für Produktdetails.
S-8239AAD-M6T1U
Im Detail sehen Datenblätter

S-8239AAD-M6T1U

Product Overview

Category

S-8239AAD-M6T1U belongs to the category of integrated circuits (ICs).

Use

This IC is commonly used for voltage detection and battery protection in various electronic devices.

Characteristics

  • Voltage detection range: 2.5V to 4.5V
  • Low power consumption
  • Overcharge and over-discharge protection
  • Short-circuit protection
  • Small package size
  • High accuracy voltage detection

Package

The S-8239AAD-M6T1U IC is available in a small surface-mount package, typically measuring 3mm x 3mm.

Essence

The essence of this product lies in its ability to accurately detect voltage levels and provide protection against overcharging, over-discharging, and short-circuits, ensuring the safe operation of electronic devices.

Packaging/Quantity

The S-8239AAD-M6T1U IC is usually packaged in reels or tape and reel packaging, with a typical quantity of 3000 units per reel.

Specifications

  • Input voltage range: 2.5V to 4.5V
  • Operating temperature range: -40°C to +85°C
  • Quiescent current: 1µA (typical)
  • Overcharge detection voltage: 4.25V ± 0.05V
  • Over-discharge detection voltage: 2.5V ± 0.1V
  • Short-circuit detection delay time: 10ms (typical)

Detailed Pin Configuration

The S-8239AAD-M6T1U IC has the following pin configuration:

| Pin Name | Function | |----------|----------| | VIN | Input voltage | | GND | Ground | | VOUT | Output voltage | | EN | Enable pin | | SCD | Short-circuit detection output | | OVD | Over-discharge detection output | | OVC | Overcharge detection output |

Functional Features

  1. Voltage Detection: The IC accurately detects the input voltage and provides corresponding outputs for overcharge, over-discharge, and short-circuit conditions.
  2. Protection Mechanisms: It offers protection against overcharging, over-discharging, and short-circuits, preventing damage to the connected electronic devices.
  3. Low Power Consumption: The IC operates with low quiescent current, minimizing power consumption and extending battery life.
  4. Small Package Size: The compact size of the IC allows for easy integration into various electronic devices.

Advantages and Disadvantages

Advantages

  • Accurate voltage detection
  • Comprehensive protection features
  • Low power consumption
  • Compact package size

Disadvantages

  • Limited voltage range (2.5V to 4.5V)
  • Not suitable for applications requiring higher voltage detection

Working Principles

The S-8239AAD-M6T1U IC works by continuously monitoring the input voltage. It compares the detected voltage with pre-set thresholds for overcharge, over-discharge, and short-circuit conditions. When any of these conditions are met, the corresponding output pins are activated, signaling the need for protective actions.

Detailed Application Field Plans

The S-8239AAD-M6T1U IC finds applications in a wide range of electronic devices, including but not limited to: - Mobile phones - Tablets - Portable gaming consoles - Digital cameras - Bluetooth headsets - Wearable devices

Detailed and Complete Alternative Models

Some alternative models that offer similar functionality to the S-8239AAD-M6T1U IC include: - S-8254A Series - S-8261A Series - S-8264A Series - S-8265A Series

These alternative models provide voltage detection and battery protection features, catering to different voltage ranges and package sizes.

(Note: The word count of this response is 431 words)

Listen Sie 10 häufige Fragen und Antworten im Zusammenhang mit der Anwendung von S-8239AAD-M6T1U in technischen Lösungen auf

Sure! Here are 10 common questions and answers related to the application of S-8239AAD-M6T1U in technical solutions:

Q1: What is S-8239AAD-M6T1U? A1: S-8239AAD-M6T1U is a specific model of voltage detector IC (integrated circuit) used in various technical solutions.

Q2: What is the purpose of S-8239AAD-M6T1U? A2: The purpose of S-8239AAD-M6T1U is to monitor the voltage level of a power supply and provide an output signal when the voltage falls below or exceeds a certain threshold.

Q3: How does S-8239AAD-M6T1U work? A3: S-8239AAD-M6T1U works by comparing the input voltage with a reference voltage. If the input voltage crosses the set threshold, it triggers an output signal.

Q4: What are the typical applications of S-8239AAD-M6T1U? A4: S-8239AAD-M6T1U is commonly used in battery-powered devices, portable electronics, automotive systems, and other applications where monitoring voltage levels is crucial.

Q5: What is the operating voltage range of S-8239AAD-M6T1U? A5: The operating voltage range of S-8239AAD-M6T1U is typically between 1.6V and 6.0V.

Q6: Can S-8239AAD-M6T1U be used for overvoltage protection? A6: Yes, S-8239AAD-M6T1U can be used for both undervoltage and overvoltage protection by setting appropriate threshold voltages.

Q7: Does S-8239AAD-M6T1U have any built-in delay function? A7: Yes, S-8239AAD-M6T1U has a built-in delay function to prevent false triggering due to voltage fluctuations or noise.

Q8: What is the output type of S-8239AAD-M6T1U? A8: S-8239AAD-M6T1U provides an open-drain output, which requires an external pull-up resistor for proper signal detection.

Q9: Can S-8239AAD-M6T1U be used in high-temperature environments? A9: Yes, S-8239AAD-M6T1U is designed to operate in a wide temperature range, typically from -40°C to 105°C.

Q10: Is S-8239AAD-M6T1U available in different package options? A10: Yes, S-8239AAD-M6T1U is available in various package options, such as SOP-5 and SOT-23-5, providing flexibility for different design requirements.

Please note that the specific details and features may vary depending on the manufacturer's specifications.