S-80936CLPF-G66TFU

Product Overview

Category

S-80936CLPF-G66TFU belongs to the category of integrated circuits (ICs).

Use

This product is commonly used in electronic devices for voltage detection and reset functions.

Characteristics

• Voltage detection range: 1.6V to 6.0V
• Low supply current: 1.0µA (typ.)
• High accuracy voltage detection: ±2%
• Built-in delay circuit: 50ms (typ.)
• Small package size: SOT-23-5

Package

The S-80936CLPF-G66TFU is packaged in a small outline transistor (SOT) package, specifically SOT-23-5.

Essence

The essence of this product lies in its ability to accurately detect voltage levels within a specified range and provide a reset signal when necessary.

Packaging/Quantity

The S-80936CLPF-G66TFU is typically supplied in reels, with 3,000 units per reel.

Specifications

• Supply voltage range: 1.6V to 6.0V
• Operating temperature range: -40°C to +85°C
• Output type: Active low
• Quiescent current: 1.0µA (typ.)
• Accuracy: ±2%
• Delay time: 50ms (typ.)
• Package type: SOT-23-5

Detailed Pin Configuration

The S-80936CLPF-G66TFU has five pins arranged as follows:

```

---

| | --| |-- |____| ```

Pin 1: VDD (Supply voltage) Pin 2: GND (Ground) Pin 3: RESET (Reset output) Pin 4: VIN (Voltage input) Pin 5: NC (No connection)

Functional Features

• Voltage detection: The S-80936CLPF-G66TFU can accurately detect voltage levels within the specified range.
• Reset function: When the detected voltage falls below a certain threshold, the RESET pin outputs a low signal to initiate a reset operation.
• Low power consumption: With a quiescent current of only 1.0µA, this IC minimizes power consumption in electronic devices.

Advantages and Disadvantages

Advantages

• Wide voltage detection range allows for versatile applications.
• High accuracy ensures reliable voltage detection.
• Small package size enables space-saving designs.
• Low power consumption prolongs battery life in portable devices.

Disadvantages

• Limited to voltage detection and reset functions, may not be suitable for complex applications requiring additional features.
• Not compatible with higher voltage ranges beyond 6.0V.

Working Principles

The S-80936CLPF-G66TFU operates by continuously monitoring the voltage level at the VIN pin. When the voltage drops below the specified threshold, the internal circuit triggers the RESET pin to output a low signal, initiating a reset operation. This functionality is achieved through precise voltage detection and the built-in delay circuit.

Detailed Application Field Plans

The S-80936CLPF-G66TFU finds applications in various electronic devices where voltage detection and reset functions are required. Some potential application fields include:

1. Battery-powered devices: Ensures proper functioning and prevents damage due to low voltage conditions.
2. Microcontrollers and microprocessors: Provides a reliable reset mechanism during power-up or voltage fluctuations.
3. Industrial control systems: Monitors voltage levels to ensure stable operation and prevent system failures.
4. Automotive electronics: Facilitates safe operation by detecting abnormal voltage conditions and triggering necessary actions.

Detailed and Complete Alternative Models

1. S-80930CLPF-G66TFU: Similar to S-80936CLPF-G66TFU, but with a lower voltage detection range of 1.2V to 6.0V.
2. S-80940CLPF-G66TFU: Similar to S-80936CLPF-G66TFU, but with a higher voltage detection range of 1.8V to 6.0V.
3. S-80950CLPF-G66TFU: Similar to S-80936CLPF-G66TFU, but with a higher voltage detection range of 2.5V to 6.0V.

These alternative models offer similar functionality with slight variations in voltage detection ranges to cater to different application requirements.

In conclusion, the S-80936CLPF-G66TFU is an integrated circuit that provides accurate voltage detection and reset functions. Its small package size, low power consumption, and high accuracy make it suitable for various electronic devices. However, it may not be suitable for complex applications requiring additional features.