S-80921CLNB-G6RT2U belongs to the category of integrated circuits (ICs).
This product is commonly used in electronic devices for voltage detection and reset functions.
The S-80921CLNB-G6RT2U is available in a compact SOT-23-5 package.
The essence of this product lies in its ability to accurately detect voltage levels and provide a reset signal when necessary, ensuring proper functioning of electronic devices.
The S-80921CLNB-G6RT2U is typically packaged in reels, with 3,000 units per reel.
The S-80921CLNB-G6RT2U has the following pin configuration:
The S-80921CLNB-G6RT2U operates by comparing the input voltage (VIN) with the selected detection voltage. When the input voltage falls below the detection threshold, the reset output (RESET) is activated, indicating a low voltage condition. This signal can be used to trigger a reset or shutdown sequence in the connected electronic device.
The S-80921CLNB-G6RT2U finds application in various electronic devices where accurate voltage detection and reset functionality are crucial. Some potential application fields include:
These alternative models offer similar functionality and can be considered based on specific requirements and constraints.
Word count: 531 words
Sure! Here are 10 common questions and answers related to the application of S-80921CLNB-G6RT2U in technical solutions:
1. What is the operating voltage range of S-80921CLNB-G6RT2U? - The operating voltage range of S-80921CLNB-G6RT2U is typically between 2.0V and 5.5V.
2. What is the maximum output current of S-80921CLNB-G6RT2U? - The maximum output current of S-80921CLNB-G6RT2U is 100mA.
3. Can S-80921CLNB-G6RT2U be used as a voltage regulator for microcontrollers? - Yes, S-80921CLNB-G6RT2U can be used as a voltage regulator for microcontrollers as it provides stable voltage output.
4. Does S-80921CLNB-G6RT2U have built-in overcurrent protection? - Yes, S-80921CLNB-G6RT2U has built-in overcurrent protection, which helps protect the device from excessive current.
5. What is the quiescent current of S-80921CLNB-G6RT2U? - The quiescent current of S-80921CLNB-G6RT2U is typically around 30µA.
6. Can S-80921CLNB-G6RT2U be used in battery-powered applications? - Yes, S-80921CLNB-G6RT2U can be used in battery-powered applications due to its low quiescent current and wide operating voltage range.
7. Is S-80921CLNB-G6RT2U suitable for automotive applications? - Yes, S-80921CLNB-G6RT2U is suitable for automotive applications as it meets the AEC-Q100 Grade 1 requirements.
8. What is the thermal shutdown temperature of S-80921CLNB-G6RT2U? - The thermal shutdown temperature of S-80921CLNB-G6RT2U is typically around 160°C.
9. Can S-80921CLNB-G6RT2U be used in space-constrained designs? - Yes, S-80921CLNB-G6RT2U is available in a small SOT-23-5 package, making it suitable for space-constrained designs.
10. Does S-80921CLNB-G6RT2U have a low dropout voltage? - Yes, S-80921CLNB-G6RT2U has a low dropout voltage of typically 0.1V at 100mA output current.
Please note that these answers are general and may vary depending on the specific application and conditions. It's always recommended to refer to the datasheet or consult with the manufacturer for detailed information.