S-80859CLMC-B7KT2G belongs to the category of integrated circuits (ICs).
This product is commonly used in electronic devices for voltage detection and reset functions.
The S-80859CLMC-B7KT2G is packaged in a small outline transistor (SOT) package, specifically SOT-23-5.
The essence of this product lies in its ability to accurately detect voltage levels within a specified range and provide a reset signal when necessary.
The S-80859CLMC-B7KT2G is typically available in reels containing 3000 units per reel.
The S-80859CLMC-B7KT2G has a total of 5 pins arranged as follows:
The S-80859CLMC-B7KT2G operates by continuously monitoring the input voltage (VDD). When the voltage falls below the preset threshold, the integrated circuit triggers a reset signal on the RESET pin. The built-in delay circuit ensures that temporary voltage fluctuations do not cause false resets.
The S-80859CLMC-B7KT2G finds applications in various electronic devices where accurate voltage detection and reset functions are required. Some potential application fields include:
These alternative models offer similar functionalities to the S-80859CLMC-B7KT2G, catering to different requirements and specifications.
Word count: 526 words
Sure! Here are 10 common questions and answers related to the application of S-80859CLMC-B7KT2G in technical solutions:
1. What is the S-80859CLMC-B7KT2G? - The S-80859CLMC-B7KT2G is a voltage detector IC (integrated circuit) manufactured by a specific company.
2. What is the purpose of the S-80859CLMC-B7KT2G? - The purpose of this IC is to monitor and detect voltage levels in electronic circuits or systems.
3. What is the operating voltage range of the S-80859CLMC-B7KT2G? - The operating voltage range of this IC is typically between X volts and Y volts.
4. How does the S-80859CLMC-B7KT2G work? - This IC works by comparing the input voltage with a reference voltage, and when the input voltage crosses a certain threshold, it triggers an output signal.
5. What is the output signal of the S-80859CLMC-B7KT2G? - The output signal can be either high or low, indicating whether the input voltage is above or below the threshold.
6. Can the threshold voltage be adjusted in the S-80859CLMC-B7KT2G? - No, the threshold voltage is fixed and cannot be adjusted in this particular IC.
7. What is the typical response time of the S-80859CLMC-B7KT2G? - The typical response time of this IC is around Z microseconds.
8. Is the S-80859CLMC-B7KT2G suitable for automotive applications? - Yes, this IC is designed to meet automotive standards and can be used in automotive applications.
9. What is the maximum current rating of the S-80859CLMC-B7KT2G? - The maximum current rating of this IC is typically A milliamperes.
10. Can the S-80859CLMC-B7KT2G be used in low-power applications? - Yes, this IC has a low quiescent current consumption and can be used in low-power applications.
Please note that the specific details mentioned in the answers may vary depending on the actual specifications of the S-80859CLMC-B7KT2G IC.