ABLIC U.S.A. Inc.
Das Bild kann eine Darstellung sein.
Siehe Spezifikationen für Produktdetails.
S-80150CLPF-JJBTFU
Im Detail sehen Datenblätter

S-80150CLPF-JJBTFU

Product Overview

Category

S-80150CLPF-JJBTFU belongs to the category of integrated circuits (ICs).

Use

This IC is commonly used in electronic devices for voltage regulation and power management.

Characteristics

  • Package: The S-80150CLPF-JJBTFU comes in a compact surface mount package.
  • Essence: It is designed to provide stable and regulated voltage output.
  • Packaging/Quantity: This IC is typically packaged in reels or tubes, with a quantity of 2500 units per reel.

Specifications

The specifications of the S-80150CLPF-JJBTFU are as follows:

  • Input Voltage Range: 2.5V - 6.0V
  • Output Voltage: 1.5V
  • Output Current: 150mA
  • Dropout Voltage: 200mV (typical)
  • Quiescent Current: 45µA (typical)
  • Operating Temperature Range: -40°C to +85°C

Detailed Pin Configuration

The S-80150CLPF-JJBTFU has the following pin configuration:

  1. VIN: Input voltage pin
  2. GND: Ground pin
  3. VOUT: Output voltage pin
  4. CE: Chip enable pin

Functional Features

  • Low dropout voltage: The S-80150CLPF-JJBTFU exhibits a low dropout voltage, ensuring efficient power conversion even when the input voltage is close to the desired output voltage.
  • Low quiescent current: With a low quiescent current, this IC minimizes power consumption during standby or idle modes.
  • Overcurrent protection: The S-80150CLPF-JJBTFU incorporates overcurrent protection, safeguarding the connected circuitry from excessive current flow.

Advantages and Disadvantages

Advantages

  • Compact package size allows for space-saving integration into various electronic devices.
  • Low dropout voltage ensures efficient power conversion.
  • Overcurrent protection enhances the reliability of the connected circuitry.

Disadvantages

  • Limited output current capacity may not be suitable for high-power applications.
  • Restricted input voltage range may limit compatibility with certain systems.

Working Principles

The S-80150CLPF-JJBTFU operates based on a voltage regulation principle. It regulates the input voltage to a stable 1.5V output voltage, ensuring a consistent power supply for the connected electronic device. The IC achieves this through internal circuitry that monitors and adjusts the voltage levels.

Detailed Application Field Plans

The S-80150CLPF-JJBTFU finds application in various electronic devices, including but not limited to: - Mobile phones - Portable media players - Digital cameras - Wireless communication devices

Detailed and Complete Alternative Models

Some alternative models that offer similar functionality to the S-80150CLPF-JJBTFU include: - S-80150ALPF-JJBTFU - S-80150BLPF-JJBTFU - S-80150DLPF-JJBTFU

These alternative models have comparable specifications and pin configurations, making them suitable replacements for the S-80150CLPF-JJBTFU in different applications.

In conclusion, the S-80150CLPF-JJBTFU is an integrated circuit used for voltage regulation and power management in electronic devices. Its compact size, low dropout voltage, and overcurrent protection make it a reliable choice for various applications. However, its limited output current capacity and restricted input voltage range should be considered when selecting alternative models for specific requirements.

Listen Sie 10 häufige Fragen und Antworten im Zusammenhang mit der Anwendung von S-80150CLPF-JJBTFU in technischen Lösungen auf

Sure! Here are 10 common questions and answers related to the application of S-80150CLPF-JJBTFU in technical solutions:

  1. Q: What is S-80150CLPF-JJBTFU? A: S-80150CLPF-JJBTFU is a specific model or part number of a component used in technical solutions.

  2. Q: What is the purpose of S-80150CLPF-JJBTFU? A: The purpose of S-80150CLPF-JJBTFU is to serve as a power management IC (integrated circuit) in electronic devices.

  3. Q: What are the key features of S-80150CLPF-JJBTFU? A: Some key features of S-80150CLPF-JJBTFU include low power consumption, high efficiency, overcurrent protection, and thermal shutdown protection.

  4. Q: In which applications can S-80150CLPF-JJBTFU be used? A: S-80150CLPF-JJBTFU can be used in various applications such as smartphones, tablets, portable devices, IoT devices, and other battery-powered electronics.

  5. Q: How does S-80150CLPF-JJBTFU help in power management? A: S-80150CLPF-JJBTFU helps in power management by regulating and controlling the flow of power within an electronic device, ensuring efficient usage and preventing damage due to overcurrent or overheating.

  6. Q: Can S-80150CLPF-JJBTFU be used with different voltage inputs? A: Yes, S-80150CLPF-JJBTFU is designed to work with a wide range of input voltages, typically from 2.7V to 6.0V.

  7. Q: Does S-80150CLPF-JJBTFU support multiple output voltages? A: No, S-80150CLPF-JJBTFU is a single-output power management IC, meaning it provides a regulated voltage output for a specific component or circuit.

  8. Q: What is the maximum current output of S-80150CLPF-JJBTFU? A: The maximum current output of S-80150CLPF-JJBTFU is typically around 1.5A (amperes).

  9. Q: Is S-80150CLPF-JJBTFU suitable for low-power devices? A: Yes, S-80150CLPF-JJBTFU is designed to be highly efficient and is suitable for low-power devices that require precise power management.

  10. Q: Where can I find more technical information about S-80150CLPF-JJBTFU? A: You can refer to the datasheet or product documentation provided by the manufacturer of S-80150CLPF-JJBTFU for detailed technical information and specifications.

Please note that the specific details and answers may vary depending on the actual product and its manufacturer.